AEG COMPETENCE 524 B Operating Instructions Manual page 25

Multi-function build-in single oven
Hide thumbs Also See for COMPETENCE 524 B:
Table of Contents

Advertisement

Main oven
If your oven has a catalytic roof, sides and back panel either as
standard equipment or if you have bought these parts separately
and fitted them, then the following information will be of interest to
you.
The liners help to keep the oven cleaner as they clean themselves
to a great extent during roasting and baking at temperatures
above 200 °C. As cleaning may be improved by exposure to a
higher temperature it may be necessary to run the oven at 250 °C
for 1 or 2 hours per week. Before carrying out such a heat cycle,
remove all oven equipment and make sure that you have cleaned
the unlined surfaces to prevent any soil from baking on. For isolat¬
ed stubborn stains use a soft bush and very hot soapy water.
Never use abrasive cleaners or scouring powders.
Warning! Isolate my oven from supply before replacing my
oven lamp(s).
To clean the glass cover(s) or change my ovt^i lamp(s) the
glass cover(s) should only be unclipped by hand. Do not
use tools of any kind.
After cleaning the lamp cover(s) or changing the light bulb(s) refit
the lamp cover(s).
Cleaning the
lamp cover(s)
or replacing
the oven
lamp(s) in the
main oven
25

Advertisement

Table of Contents
loading

Table of Contents