Before Initial Setup - Hamilton Beach Brita Hub Manual

Before Initial Setup:

Please follow the instructions below before setting up your Brita Hub
Before first use: Wash Water Reservoir, Lid, and Drip Tray in hot, soapy water. Rinse and dry.
NOTE: Place Brita Hub™ on a flat surface out of direct sunlight to avoid algae growth in Water Reservoir.
FILTER LIFE Light Color
The FILTER LIFE light will illuminate as you are dispensing water to
indicate when it's time to replace your Brita Hub™ filter.
Green: Filter life is sufficient (illuminates during approximately
0-100 gallons of water dispensed).
Yellow: You've filtered approximately 100 gallons of water; replace
your filter soon (illuminates during approximately 100-120 gallons
dispensed).
Red: You've filtered approximately 120 gallons of water; it's time
to replace your filter (illuminates during approximately 120-130
gallons dispensed).
Flashing red: You're way past your filter's useful life. It's seriously
time to replace your filter to keep reducing 70+ contaminants
(illuminates if filter hasn't been replaced after approximately 130
gallons). Light will continue to flash even after dispensing.
To order filter replacements, visit brita.com/thehub.
6
.
TM
ADD WATER Light
12 oz Button
Manual Dispense Button
FILTER LIFE Light
20 oz Button