Hitachi PRIMAIDE Instruction Manual page 5

IMPORTANT
PRECAUTION ON CE CONFORMITY MARKING
1. ELECTROMAGNETIC COMPATIBILITY REQUIREMENT
2. SAFETY REQUIREMENT
3. RoHS REQUIREMENT
In consideration of use in the European countries, this instrument
bears the CE mark indicating the conformity to the requirements
mentioned below.
This instrument is designed to satisfy the European Norm
EN61326-1 (2013) for the CE conformity marking through
conformity to the EMC Directive 2014/30/EU.
This instrument is classified as Class A of EN61326-1. So, this
instrument must not be used in domestic establishments nor in
establishments directly connected to a low voltage power supply
network which supplies buildings used for domestic purpose.
And this instrument is also designed to comply with table 1
"Basic immunity test requirements" in the above European
Norms. If the instrument is used near an intense
electromagnetic source, however, interfering noise may be given
to the instrument to cause an adverse effect on its performance
or functionality.
This instrument also conforms to the LVD Directive 2014/35/EU,
and has the CE conformity marking for it. The instrument is
designed to satisfy the European Norm EN61010-1 (2010). Note
that this instrument falls into Class-1 Pollution Level 2 of
EN61010-1 (2010).
This instrument also conforms to the RoHS Directive 2011/65/EU,
and has the CE conformity marking for it. The instrument is
designed to RoHS the European Norm EN IEC63000:2018.
IMPORTANT- 1