Related Manuals for DMC DUSH EM Series
Summary of Contents for DMC DUSH EM Series
- Page 1 EM Series Gesture Model 12.1” Panel Computer EMG7 EMG7-312A8-00DC-x11-01 EMG7-312A8-00DC-107-01 Instruction Manual DMC Co., Ltd. https: //www.dush.co.jp/english/ 16A4A4-00012E-4...
-
Page 2: Table Of Contents
Table of Contents Introduction ............................4 Notes ..............................4 Precautions for safe use ........................4 3-1 Warnings ............................5 3-2 Cautions ............................6 3-3 Handling of LCDs ..........................8 3-4 Handling of Touch Screens ......................8 3-5 Handling of microSD card ......................... 9 Items Included in Packag ........................ - Page 3 Starting Method ..........................27 Maintenance ............................ 27 15-1 Display ............................27 15-2 Regular Maintenance ........................27 15-3 Changing of Batteries ........................27 Compatible Standards ........................28 14-1 UL Standards ..........................28 14-2 CE Marking ........................... 28 14-3 RoHS Directive ..........................28 14-4 FCC ..............................
-
Page 4: Introduction
▪ DMC shall not be held liable in any way for damages or losses, nor be held responsible for any claims by a third party as a result of using this product. -
Page 5: Warnings
3-1 Warnings Warning! Warnings for Design Designing switches that can cause human injuries and/or property damages on the Touch Screen is strictly prohibited. Unintentional output signals due to malfunction of the main body, units, and/or cables can cause serious injuries. Design the system so that switches with major functions are equipped on devices other than the EMG7 itself. -
Page 6: Cautions
Warnings for Wiring For wiring and installation, please refer to the manual ad specification in order to conduct it correctly. It may cause fires and/or electric shocks. Before installing the power cable, make sure power is not being supplied from power source. It may cause electric shocks. - Page 7 Precautions for Safe Use Do not press down hard on the display area of EMG7 with hard objects. It may break the LCD panel and may cause injuries. Also, do not press down on the panel with sharp objects such as mechanical pencils or drivers.
-
Page 8: Handling Of Lcds
3-3 Handling of LCDs The LCD display contains skin-irritating materials. If liquid materials flow out due to damage and comes in contact with skin, wash the area under running water for at least 15 minutes and consult a doctor. The LCD display might have uneven brightness according to the contents being displayed. This is not a malfunction. -
Page 9: Handling Of Microsd Card
3-5 Handling of microSD card Use a computer for important data and take backup to an outside media (hard disc, CD-R, etc.) regularly. We will not be held liable for any data lost or changed that is registered in the microSD card. Do not remove the microSD card or turn the unit power off during write or read. -
Page 10: Items Included In Packag
*1. 1 English version and 1 Japanese version. ＜Note＞ Although efforts have been made to ensure quality and packaging at shipment, should you notice any damage or a shortage of parts, please contact a dealer or DMC for additional instructions before use. -10- 16A4A4-00012E-4... -
Page 11: Names Of Parts
Names of Parts 5-1 Front Status LED The status LED displays the state of the EMG by the LED color shown below: LED State EMG State Power not applied Amber, steady OS starting Green, steady Normal operating state Backlight off Green, blinking (Normal Operation) 5-2 Back... -
Page 12: Top
5-3 Top Mounting Holes 5-4 Bottom Ethernet USB Host USB Device Serial Port (COM1/COM2） LINE OUT microSD Card Slot Power Input Mounting Holes -12- 16A4A4-00012E-4... -
Page 13: External Interface
External Interface 6-1 microSD Card Slot Connector : microSD / SDHC memory card (Push-in/push-out method) Corresponding media : microSD/SDHC memory card Maximum capacity : 32GB 6-2 Serial Port (COM1/COM2) Serial port :COM1 : RS232C :COM2 : RS232C : RS485 (Linux Model only) Connector : Euro terminal connector (<Tyco Electronics>... -
Page 14: Ethernet
6-3 Ethernet Ethernet : 10BASE-T/100BASE-TX Connector : RJ-45 PIN No. Signal Schematic YELLOW GREEN ※ ※ ※ ※ NC is ‘not connected’. Status LED LED State State On, Green LINK/ACT On, Yellow SPEED Compatible cable : Above category 5 6-4 USB Host Port Interface : USB2.0 Number of Ports... -
Page 15: Audio Interface (Line Out)
6-6 Audio Interface (LINE OUT) Interface : LINE OUT (Stereo) : φ3.5 Stereo JACK Connector Maximum output level : 1Vrms Use built-in amplifier when connecting to speakers. PIN No. Signal Schematic Lineout R Lineout L 6-7 Power Connector Interface : 12VDC/24VDC IN Connector : Euro terminal connector (<Tyco Electronics>284539-3) Recommended cable connector : (<Tyco Electronics>284510-3) *Included as accessory. -
Page 16: Specification
Specification 7-1 General Specification Item Specification Voltage Rating 12VDC / 24VDC Voltage Allowance Range 12VDC±20% / 24VDC±20% Power Consumption * 20W or under（Typ. 11W） Power FG Connection FG (Frame GND) and SG (Signal GND) are connected internally. FG (Frame GND) and GND are not connected. Power consumption for EMG7 unit only. -
Page 17: Installation Specification
7-3 Installation Specification Item Specification Grounding resistance of 100Ω, 2mm [0.0062inch ] or thicker Grounding wire, or your country’s applicable standard. Protection Structure: IP65 * Structure (Front side only when mounted to panel) Installation : Panel mounting Cooling Natural cooling Weight Approx. -
Page 18: Installation
Installation 8-1 Installation Conditions ・When mounting to panel, be sure to have enough room to insert and remove the microSD card, cables, and mounting brackets. ・Consider specification temperature between EMG7 and the structure and parts. Be sure to have good ventilation. ・Please use in ambient temperature of 0 to 55℃... -
Page 19: Panel Mounting
8-2 Panel Mounting 8-2-1 Panel Dimension Panel thickness range: 1.6 ㎜ to 5.0 ㎜ Panel opening size：302 × 236mm Under 4-R3 ·Material of the mounting panel should be made of metal. ·Even within the recommended panel thickness range, depending on the material and size, the strength may not be maintained when pressure is applied. -
Page 20: Installation Procedure
8-2-3 Installation Procedure ① Install unit (with gasket installed) to the panel from the front. *Make sure it is installed in the correct direction ② Insert mounting hook in the mounting holes in the four locations of the unit. Mounting Holes Bottom Mounting Bracket Panel... -
Page 21: Mounting To A "Vesa" Arm
8-3 Mounting to a “VESA” Arm EM can be installed on a commercially available Video Electronics Standards Association (VESA) MIS-D arm, stand, or apparatus that is listed to comply with the UL1678 standard. Refer to manual of arm or stand for installation procedures. Mounting Hole dimension is as below Use M4 screws to mount. -
Page 22: Wiring
Wiring Make sure power is not supplied when connecting to avoid the risk of human injury or damage to equipment due to electrocution. Do not turn the power on unitl all connections have been made. When connecting each interface, review each interface specifications. Prepare the cables to be used according to the specifications. -
Page 23: Cautions For Power Supply Wiring
■Wiring Procedures Wire the power cables as instructed below. (1) Make sure power is not conducting. (2) Loosen the screw clamp on the connector. (3) Strip the cable; twist the core wire and insert to connection. (4) Tighten the screw clamp and fix the wire. (5) Connect the connector to interface of unit. -
Page 24: Inserting And Removing The Microsd Memory Card
Inserting and Removing the microSD Memory Card 10-1 Inserting the Memory Card 1) Insert the micro SD in the card slot on the bottom of the unit. ※Be sure the microSD is inserted in the correct orientation. Connection terminal should come to front when inserting. -
Page 25: Removing The Microsd Memory Card
10-2 Removing the microSD Memory Card (1) The microSD will slightly pop out when pushed in further by finger. (2) Pinch the microSD and pull out. Note: ・Be careful of the direction of the microSD when inserting. Do not insert in the wrong direction. ・Be sure to take back up data of the microSD assuming unexpected accidents. -
Page 26: Calibration
Calibration There are two types of calibration to EMG7. One type is sensor sensitivity calibration to optimize the touch screen function by resetting the influence of ambient noise or metals of the installation environment, and the other is to set the value of coordinate with the pressed point. -
Page 27: Starting Method
13-3 Changing of Batteries EMG7 has built in battery for back up of SRAM and clock data. If battery needs to be exchanged, please contact us at DMC. Do not attempt to exchange the battery yourself. It may cause injuries. -
Page 28: Compatible Standards
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user is required to correct the interference at their own expense. Changes or modifications to this unit that are not expressly approved by DMC could void the user’s authority to operate the equipment. -
Page 29: List Of Option
List of Option ■ Mounting brackets Model Description SW-TK-01 4pcs ■ Development kit Model Description SWDK-101 Power supply unit Software development environment(DVD) *The option for EMG7-312A8-00DC-107-01 （Linux Model） This is needed when using InfoSOSA application. -29- 16A4A4-00012E-4... -
Page 30: Warranty And Repair
16-4 Repair Condition Only DMC products can be repaired. Options are exempt. Programs and data might be lost during repair. Please be sure to take back-up. DMC will not be held liable for any programs or data lost during repair. -
Page 31: Others
URL: https: //www.dush.co.jp/english/ This product and document are protected by the copyright law. Photocopying, duplicating, reproducing, and modifying of this product or document in part or by whole is prohibited. Copyright(C) 2023 DMC Co., Ltd. All Rights Reserved -31- 16A4A4-00012E-4...
Need help?
Do you have a question about the DUSH EM Series and is the answer not in the manual?
Questions and answers