Extech Instruments 407764 User Manual page 10

Calibration / Repair Services
Extech offers complete repair and calibration services for all of the products we sell. Fop
periodic calibration, NIST certification or repair of any Extech product, call customer service
for details on services available. Extech recommends that calibration be performed on an
annual basis to insure calibration integrity.
Warranty
EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts
and workmanship for one year from date of shipment (a six month limited warranty applies on
sensors and cables). If it should become necessary to retum the instrument for service during or
beyond the warranty period, contact the Customer Service Department at (781) 890-7440 ext.
210 for authorization or visit our website at www.extech.com (click on Contact Extech and go to
Service Department to request an RA number). A Return Authorization (RA) number must be
issued before any product is retumed to Extech. The sender is responsible for shipping charges,
freight, insurance and proper packaging to prevent damage in transit. This warranty does not
apply to defects resulting from action of the user such as misuse, improper wiring, operation
outside of specification, improper maintenance or repair, or unauthorized modification. Extech
specifically disclaims any implied warranties or merchantability or fitness for a specific purpose
and will not be liable for any direct, indirect, incidental or consequential damages. Extech's total
liability is limited to repair or replacement of the product. The warranty set forth above is inclusive
and no other warranty, whether written or oral, is expressed or implied.
s
Support Hotline (781) 890-7440
Tech support: Ext. 200; Email: suDDort@.extech.com
Repair/Retums: Ext. 210; Email: repair@extech.com
Website: www.extech.com
Copyright © 2001 Extech Instruments Corporation. All rights reserved
including the right of reproduction in whole or in part in any form.
10
Model 407764 Version 1.3 October 2001