Sensio Link-S SE79095 Installation Instructions

INSTALLATION

INSTRUCTIONS
IMPORTANT: Please read these instruc�ons before commencing installa�on and retain for future reference.

Components

Receiver
(SE79095 & SE79195 Only)
Important Safety Informa�on
Please read these instruc�ons carefully before a�emp�ng to install this
product. It is advisable to keep these instruc�ons in a safe place for future
reference.
We recommend that you consult a qualified electrician. All electrical
installa�on must be carried out in accordance with current IEE wiring
regula�ons (BS7671).
These products must not be modified, if any modifica�on are made, it may These p
invalidate the warranty and may render the product unsafe. These LED
lights operate low voltage (24V).
• Install on smooth flat surface(s) only.
• Do not exeed or stretch the cable length of each wire.
• This product is IP20 Rated.
Safety Instruc�ons
1. This product is only suitable for connec�ng to Sensio LED lights and
fi�ngs.
2. Always read the installa�on guide of any product used in conjunc�on
with this product.
Waste Electrical & Electronic Equipment (WEEE)
The symbol on the product, or on the document accompanying the product, the crossed out wheelie
bin symbol, indicates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collec�on point for the recycling of electrical and
electronic waste.
UK Address: Sensio Ltd, Unit 7, Speedwell Road, Castleford, West Yorks, WF10 5PY Sensio House, Unit 7, Speedwell Road, Whitwood, Castleford, West Yorkshire, WF10 5PY
EU Rep.: Sensio Lighting Dublin Ltd, The Black Church, St. Mary's Place, Dublin, Ireland, D07 P4AX
www.sensio.co.uk
Technical drawings for illustra�on purposes only, Sensio has the right to change any informa�on without
prior no�ce.
Sensio V3
Sensio - V4
Link-S - Receiver, Magnet
and Reed Switch
Ligh�ng Control
Product Codes:
SE79095 - Link-S - Receiver, Magnet and Reed Switch
SE79195 - Link-S - Receiver
SE79295 - Link-S - Magnet & Reed Switch
Magnet & Reed Switch
( SE79095 & SE79295 Only)
SE79195 Only)
1 x Instruc�ons
2 x Screws
(SE79095 & Manual
Technical Specifica�on
3. Never exceed the total output of a LED driver or receiver.
4. Suitable for furniture ligh�ng.
5. Class III safety extra low voltage (SELV).

Tools Required

Screwdriver