Subscribe to Our Youtube Channel
Summary of Contents for GSL TECHNOLOGY P90
- Page 1 Owner’s Manual REVISED NOVEMBER 2023 Address 5800 Enterprise Dr. Jackson, MI 49201 PHONE 517-780-9090...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction..............Specifications..............P90 Box Contents............Bullet Diameter Warning..........P90 Suppressor Mounts..........Mounting the Suppressor on the FN PS90...... Removing the P90 Suppressor from the Mount....Cleaning the P90 Suppressor........Accessories..............Warnings................ Warranty Information............. Manufacturer’s Disclaimer.......... -
Page 3: Introduction
Thank You for Purchasing the P90! Thank you for your purchase of a GSL Technology suppressor. We take pride in our engineering driven products that are now, and will always be, designed and manufactured entirely in the United States. With 9 patents to his credit, and over 35 years of suppressor design and manufacturing experience, our owner and founder Greg Latka has been one of the driving forces in the suppressor industry. -
Page 4: Specifications
Mount: 12x1LH thread (GSL Bi Lock Muzzle Brake included) Note: The GSL P90 suppressor is designed specifically to be used with the FN P90, PS90 and FNP90 platforms. The GSL P90 suppressor is a full auto-rated, titanium suppressor that is built to handle rugged environments and hard use. -
Page 5: Bullet Diameter Warning
Bullet Diameter Warning GSL P90 suppressors are designed specifically to be .224". Smaller diameter bullets in pistol calibers may be used, but will not be optimized for the larger diameter of the P90 baffle/end cap combination. DOUBLE CHECK YOUR CHAMBERING prior to attaching the GSL suppressor to your firearm. -
Page 6: Mounting The Suppressor On The Fn Ps90
Mounting the P90 Suppressor on the FNPS90 1) Look through the suppressor in order to insure that there are no obstructions, damaged baffles or a damaged end cap. Shake the suppressor to insure that there is nothing loose in the suppressor. With an empty firearm, action open, and magazine removed, you are now ready to install your suppressor. -
Page 7: Removing The P90 Suppressor From The Mount
Removing the P90 Suppressor from the QD Bi-Lock Suppressor Mount To remove, reverse the steps outlined on page 6. CAUTION: Suppressors can gain 7-10° F (or more) per round fired and therefore can be EXTREMELY HOT to the touch depending upon how many rounds were fired and over what time frame they were fired. -
Page 8: Cleaning The P90 Suppressor
Cleaning the P90 Suppressor Cleaning the P90 suppressor is something that we don’t recommend, it is designed to shoot tens of thousands of rounds through it without the need for cleaning. Shooting corrosive primed ammunition can cause damage to any metal surfaces including your barrel and suppressor, so using such ammunition is never recommended. -
Page 9: Warnings
Warnings WARNING! Read the operation and maintenance manual in its entirety before using suppressor. Failure to follow the installation and maintenance instructions detailed in this manual can result in potential for serious injury to the user and damage to the weapon. Verify Firearm is Unloaded. -
Page 10: Warranty Information
Warranty Information Unconditional Lifetime Warranty. If for any reason you have an issue with a GSL Technology product, we will repair or replace it free of charge. Warranty does not apply if product is altered in any way. Damaged Suppressor: This or any suppressor may not properly operate and create significant risk of injury or death if damaged or obstructed. - Page 11 QUESTIONS? GSL Technology, Inc. CONTACT US. Suppressors are proudly made in the United States of America. Jackson, Michigan 517-780-9090...
Need help?
Do you have a question about the P90 and is the answer not in the manual?
Questions and answers