Advertisement
WA?
Gc yielel—
10. PANEL FACILITIES
@ POWER (STANDBY/ON) switch
This is the switch for electric power.
ON:
When set to the ON position, power is supplied and the
unit becomes operational.
STANDBY:
When set to the STANDBY position, the main power flow
is cut and the unit is no longer fully operational. A minute
flow
of power
feeds the unit to maintain
operation
readiness.
On the Australian and Multi-voltage models, the indicator above the
MASTER VOLUME control knob lights during STANDBY.
© The accessory remote control unit can also be used to operate
STANDBY/ON function of this switch.
¢ When not using the unit for a long period, disconnect the power cord.
(TIMER ON/OFF possible]
When the unit is switched ON, ON/OFF can be performed with the
optional timer.
NOTE:
When the power is initially tumed ON, muting will be applied to prevent
sound from being output for about 5 seconds.
@ SPEAKERS switches (mOFF,
= ON)
These are used to select the speaker through which you wish to listen.
A: When the speakers connected to A terminals are in use.
B: When the speakers connected to B terminals are in use.
* Turn
both A and
B speakers
to OFF
position when
only the
HEADPHONES are in use.
NOTE:
No sound will be heard through the speakers when both A and B
Switches are pressed if only one set of speakers has been connected
to either 4 or B SPEAKERS terminals.
@ PHONES jack
Connect the plug on your headphones to this jack. To listen to a program
through the headphones, set both SPEAKERS A and B switches to the
OFF position.
@ Remote sensor window
© SIMULATED STEREO switch
This turns monaural signals into simulated stereo sound. Use this when
you wish to experience a sense of stereo presence with AM broadcasts,
VCR or other monaural signal sources.
NOTE:
44
© V (Video) SIGNAL SELECTOR switch
This lets you switch the video signal without switching the audio signal.
This means that you can, for example, listen to a CD while watching
a video disc.
@ TUNING switches (DOWN -, UP +)
UP:
The FM or AM band is scanned in the direction of increasing
frequency.
DOWN:
The opposite operation to that of the UP switch takes place.
@® Operation display panel
(a)
(b) (c) (d)
(e)
"saat mecca
i
ee
+8
yosmea
c
(f)
(g) th)
| {k)
((m)
(nm)
(a) Displays function and custom memory name, as well as surrround
and rear level.
(b) STEREO indicator
Lights when a stereo FM broadcast is being received.
(c) TUNED indicator
Lights when a station is tuned.
(d) FM MONO indicator
Lights when the FM MONO mode is selected with the FM MODE
AUTO/MONO
switch.
{e) Frequency display
(f) VIDEO SIGNAL display
Displays the component selected with the V-SIGNAL SELECTOR
switch.
(g) TAPE 2 indicator
Lights when the TAPE 2 MONITOR switch is ON.
(h) SIMULATED STEREO indicator
(i) SURROUND
MODE indicator
Displays the surround mode selected with the SURROUND
MODE
switches.
Luiceo J ownnare
Sea
Advertisement
