Installing Multiple 3270 Connections In One Personal System/2 - IBM 3270 Quick Reference

b. Follow the instructions on the screen to run automatic
configuration. The computer automatically sets config-
uration when the backup copy of the Reference diskette
is started or when Run automatic configuration is selected
from the Set configuration menu.
Installing Multiple 3270 Connections in One Personal
System/2
4
The 3270 Connection Version B allows you to install more than
one 3270 Connection in your Personal System/2. You can install
multiple 3270 Connections in a Personal System/2 in one of two
ways:
• Install one Version A adapter, and one or more Version B
adapters
• Install one or more Version
B
adapters, and no Version A
adapter.
Note:
Do not install more than one Version A adapter in a Per-
sonal System/2.
To add a Version A adapter to a Personal System/2 that has been
configured with one or more Version B adapters:
1.
Remove the Version
B
adapter(s).
2. Install the Version A adapter.
3. Configure the Personal System/2 for the Version A adapter.
4. Reinstall the Version B adapter(s).
Note:
Do not remove the Version A adapter.
5. Configure your Personal System/2 again.
To add an additional Version B adapter to a Personal System/2
that has been configured with either a Version A or Version B
adapter:
1. Install the additional Version B adapter(s).
2. Configure your Personal System/2.