INSTRUCTIONS
For item number RC874 - Indoor Rollator
Folding and Unfolding the Rollator
To fold or unfold the rollator, there are some steps you should follow. When folding and unfolding
the rollator you should always be careful so that the rollator does not get damaged.
Folding the rollator
lf you want to fold the rollator, please follow the following steps.
1. Before folding the rollator, remove the serving tray and shopping bag.
2. To fold the rollator, pull the black handle, see photo 1.
3. You can remove the wheels by pressing the buttons on the side and sliding the wheels out of
the frame.
4. Loosen the starknobs to slide out the handlebar.
5. Photo 4 shows the rollator folded into its most compact form.
Photo 1
Photo 2
Photo 3
Photo 4
Unfolding the rollator
To unfold the rollator, please follow the following steps.
1. To unfold the rollator, push down on the black handle.The rollator will now unfold.
2. Put the wheels back into the frame and use push buttons to set at the desired height. As soon
as the wheelsnaps into place, you will hear a click.
3. Put the handlebar back into the frame and tighten the starknob.
4. The rollator is now fully unfolded, reassembled and ready to use.
The Push Handles
The push handles of your rollator are ergonomically designed. This means you have a good grip on
the push handles. As a result, pushing the rollator is not only more comfortable, but the rollator
can also be pushed safer. In addition, the handle that is visible under the push handle, intended to
adjust the height of the handlebars.The push handles are in height adjustable. If you want to adjust
the push handles in height, please follow the following steps:
1. Stand next to the rollator;
2. Loosen the knobs on both sides and adjust the height of the handles in (see photo's 6 and 7).
3. Both handles at the right height? Put the knob back on.
Need help?
Do you have a question about the RC874 and is the answer not in the manual?
Questions and answers