Philips Norelco G390 User Manual page 14

During Use:
I If cut hairs have accumulated in the Guide
Comb area, remove hairs by shaking, blowing
or using cleaning brush provided. Remember
to adjust the trimming length back to your
selected setting when you replace the comb on
Groomer.
After Each Use:
il
Make sure the Groomer is switched OFF
and disconnected from the electrical outlet.
B
Remove any attachment.
B
Also separate the top part of the mini
shaver attachment from its body (fig. 28).
Q Blow and/or shake out any hair that may
have accumulated in the attachment.
I The shaving foil is very delicate and should not
be handled.
I If foil becomes damaged, replace it. Do not
apply pressure to shaving foil.
I Donot clean the foil with the brush, as this
may cause damage.
B
Place the attachment back on the Groomer
or place it in the storage stand.
Rinsable Attachments
I If preferred your Groomer trimming
attachments (See Features©) can also be
rinsed clean after each use.
D Remove any attachment from Groomer and
rinse attachment only thoroughly under
warm tap water (fig. 29).
Never rinse attachments that are still attached to
the Groomer
B
Shake excess water from attachment (fig. 30)
and allow to dry thoroughly.
Do not use a towel to dry the mini shaver as
damage to the shaving foil could occur.
B
Place the attachment back on the Groomer
or place it in the storage stand.
This G roomer has no other user-serviceable parts.
For assistance call I -800-243-3050.