Table of Contents
Advertisement
To switch to sequential mode durinq
play
To enter additional tracks
Press PROGRAM.
This clears all programmed contents from memory.
To cancel the program play mode
Press ■ STOP.
Press once in the stop mode and twice during play.
This clears all programmed contents from memory.
Turning off the power will also cancel the program play mode.
To confirm the program
|
Press RECALL.
RECALL
□
Each time you press RECALL, the display shows programmed
track number and its sequence, so that you can verify the entire
program.
For example:
The diagram shows a program consisting of tracks 5, 3,2.
Programmed track number
Press a numeric button to specify the track
number.
(See page 14.)
■ To clear the last track in the sequence, press
CLEAR in the stop mode.
CLEAR
□
■ To cancel a track in the middle of the sequence,
press RECALL repeatedly until the display
shows the track number to be cancelled, then
press CLEAR.
RECALL
clear
□ o □
■ To cancel all the programmed tracks, press
PROGRAM twice In the stop mode and return to
step 2 on the previous page.
PROGRAM
□
The normal display will resume in about 4 seconds.
Advertisement
Table of Contents
