Download Print this page

XKGlow XK052002 Manual

Tube strobe light kit with switch panel

Advertisement

Quick Links

XK052002 – Tube Strobe Light Kit with Switch Panel
Within THREE years after the purchase date, the original buyer may return any Switch Box that has failed
due to a defect in materials or workmanship. LED tubes that have one or more LEDs fail to illuminate due to a
defect in materials or workmanship are covered with a THREE year warranty for the original buyer.
Installation of this product must be performed by a licensed professional. Should the failure of the product be
the result of damage occurring as a result of improper installation, alteration of the product or an act or omission
on the part of the consumer, this warranty is void. XKGLOW Lighting shall not be responsible for any
consequential damages which arise from the use and/or installation of the product. If the kit is installed in any
manner other than specified, XKGLOW Lighting reserves the right to deny any warranty claims at the discretion
of the technical support department. Any product return must include the original packaging, invoice number and
a statement of the alleged defect. Upon receipt of the returned product, the company will test the product for
defect. If the results of the testing do not support the warranty claim, do not reveal any defect or indicate
consumer negligence in the installation and handling of the product, then the product will be returned to you and
you will be charged a reshipping fee. If the product is returned from an address within the continental United
States, within the first 30 days after purchase, and is found to be defective, XKGLOW Lighting will exchange or
refund the original purchase expense. This offer does not extend to the cost for shipping charges on any
international packages.
Please check your local and state laws for the proper use of this product.
Improper installation of electrical products such as lighting may cause damage to any vehicle or device to
which the improperly handled or installed lighting is attached.
Improperly installed product may cause electrical injury to persons.
It is recommended that the kit should be installed by a licensed professional.
XKGLOW assumes no liability for the installation of the product.
Warranty or liability will not exceed the product purchase price, which shall be buyer's sole and exclusive
remedy.
1. Email [xk@xkglow.com] to notify us of the product issue as well as the item number and name of customer
on invoice.
2. We will send you the trouble-shooting guide to fix the issue, or to narrow down which of the component(s)
need to be replaced. If the issue still exists, we will ask you to send back the defective items to be replaced.
3. Please send the returned item as instructed, along with claims and a telephone number where you can be
reached.
4. After the returned item(s) have been accepted and inspected, we will issue a refund or replace the items
ASAP. For refunds, item(s) must be sent to XKGLOW within 14 days from date of purchase. Original shipping
charges are not refundable.
We always stand behind our products and are committed to our customers! For questions you may have,
please contact xk@xkglow.com. We normally respond within 24 hours. (Monday-Friday).
Input
Voltage
12V DC
Warranty and Disclaimer
Additional Disclaimer Terms
Return/Exchange Procedure
Max tubes
Per Zone
6 watt (14W strobe)
14 tubes
LED tube
Wattage

Advertisement

loading

Summary of Contents for XKGlow XK052002

  • Page 1 Return/Exchange Procedure 1. Email [xk@xkglow.com] to notify us of the product issue as well as the item number and name of customer on invoice. 2. We will send you the trouble-shooting guide to fix the issue, or to narrow down which of the component(s) need to be replaced.
  • Page 2 XK052002 – Tube Strobe Light Kit with Switch Panel Mounting Instructions Test all components before mounting: As shown below, plug ALL light units together and connect them to the controllers and the switch box. Connect the RED wire to the POSITIVE pole of 12V DC battery. Connect the BLACK wire to the NEGATIVE pole.
  • Page 3 XK052002 – Tube Strobe Light Kit with Switch Panel Wiring Install tubes:. Drill a ¾” hole where the wires need to pass through the body panel. Feed plugs and wires through the holes and connect them toegther. Secure the tube onto the mounting location. Route wiring: Mount the Switch Panel in a convenient location. Connect the RED wire to the POSITIVE pole of 12V DC battery or a 12V source inside the cab.