Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HESA PARTS NAVCOMM PRO
Summary of Contents for HESA PARTS NAVCOMM PRO
- Page 1 User Manual Rev 1,2 01/02/24 NAVCOMM PRO is a Plug & Play device, with Bluetooth connectivity. Power supply with 12V or USB connection, so it requires electrical installation in the vehicle. NAVCOMM PRO is IP67, so it's able to withstand rain and dust.
- Page 2 • Depending on your riding style (standing or sitting) rotate the NAVCOMM PRO until you find a comfortable position to access all the controls • Use the provided flange and the two M4 screws for attaching NAVCOMM PRO to the handlebars. Requires a 2.5mm allen wrench (not provided) •...
- Page 3 NAVCOMM PRO powered (NOTE: Since NAVCOMM PRO does not run on batteries or battery, it will never go into a standby state) 3.2 Operation •...
- Page 4 • The lever will act in roadbook mode to raise and lower vignettes Mode 2 __________ GPS NAVIGATION + MUSIC CONTROL(LED Blue) • NAVCOMM PRO is optimized to work with OSMAND. However, it is capable of maintaining the main functions such as moving map and zooming in most of the applications currently in use •...
- Page 5 • Never connect the NAVCOMM PRO if you detect any part of the NAVCOMM PRO in poor condition • It is advisable not to leave the NAVCOMM PRO exposed in warm places to direct sunlight for hours, in case you do cover the NAVCOMM PRO with a piece of clothing.
- Page 6 6. Disclaimer • NAVCOMM PRO was designed for use outside legal roads. The use of this device under legal driving conditions is the responsibility of the user • HESAPARTS is not responsible for damage caused to the electrical installation of the vehicle in the event of incorrect installation.
Need help?
Do you have a question about the NAVCOMM PRO and is the answer not in the manual?
Questions and answers