Related Manuals for LabCo 400.100.130
Summary of Contents for LabCo 400.100.130
- Page 1 MAGNETIC HOTPLATE & MAGNETIC STIRRER USER MANUAL sales@labcoscientific.com.au 1800 052 226 ABN 57 622 896 593 labcoscientific.com.au PO Box 5816, Brendale, QLD 4500 Version 1.1...
-
Page 2: Table Of Contents
CONTENTS PAGE NUMBER INTRODUCTION WARRANTY DELIVERY 1. SAFETY INSTRUCTIONS 2. PROPER USE 3. INSPECTION 4. CONTROL 5. TRIAL RUN 6. USING THE EXTERNAL TEMPERATURE SENSOR 7. RESIDUAL HEAT WARNING ‘HOT’ 8. LOGGING FUNCTION 9. FAULTS 10. MAINTENANCE AND CLEANING 11. ASSOCIATED STANDARDS AND REGULATIONS 12. -
Page 3: Introduction
PRODUCT CODE DESCRIPTIONS 400.100.130 Stirrer Magnetic Hotplate up to 30L WARRANTY This instrument is warranted to be free from defects in materials and workmanship under normal use and service, for a period of 12 months from the date of invoice. -
Page 4: Proper Use
Flammable materials or media with a low boiling temperature (Hotplate model) Overfilling of media Unsafe container • Process pathogenic materials only in closed vessels. • In the case of the stirrer bar is PTFE, please note: Elemental fluorine, three fluoride and alkali metals will corrode the PTFE and Halogen alkanes makes it expand at room temperature Molten alkali, alkaline earth metals or their solution, as well as the powder in second and third ethnic of the Periodic Table of Elements will have chemical reaction with PTFE when temperature reaches 300 ~... -
Page 5: Inspection
3. INSPECTION Receiving Inspection Unpack the equipment carefully and check for any damages which may have arisen during transport. Please contact manufacturer/supplier for technical support. Note: If there is any apparent damage to the system, please do not plug it into the power line. 4. - Page 6 DISPLAY Temperature Real value Stir ( Hotplate model) Temp Stir ℃ Error Rated value Remote Probe Remote control External probe Hotplate waning ( Hotplate model ) (Hotplate model) CHARACTERS DESCRIPTIONS TEMP AND °C Displays temperature when the heating function is switched ON (HOTPLATE MODEL ONLY) STIR Displays stirring state when the stirring function is switched ON...
-
Page 7: Trial Run
5. TRIAL RUN • Make sure the required operating voltage and power supply voltage match. • Ensure the socket is properly grounded. • Plug in the power cable and ensure the power is on and begin initialising. • Add the medium into the vessel with an appropriate stirring bar. •... -
Page 8: Residual Heat Warning 'Hot
7. RESIDUAL HEAT WARNING ‘HOT’ In order to prevent the risk of burns from a hotplate, digital hotplate has a residual heat warning function. When the heating function is switched off and the heating plate temperature is still above 50°C, “Hot” will flash to warn that there is a hazard of burns from the hotplate. -
Page 9: Maintenance And Cleaning
10. MAINTENANCE AND CLEANING • Proper maintenance can keep instruments working properly and lengthen its lifetime. • Do not spray cleanser into the instrument when cleaning. • Unplug the power line when cleaning. • Only use recommended cleansers: DYES Isopropyl alcohol CONSTRUCTION MATERIALS Water containing Isopropyl alcohol COSMETICS... -
Page 10: Associated Standards And Regulations
11. ASSOCIATED STANDARDS AND REGULATIONS Construction in accordance with the following safety standards: EN 61010-1 UL 3101-1 CAN/CSA C22.2(1010-1) EN 61010-2-10 Construction in accordance with the following EMC standards: EN 61326-1 Associated EU guidelines: EMC-guidelines: 89/336/EWG Instrument guidelines: 73/023/EWG Changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. -
Page 11: Specifications
12. SPECIFICATIONS ITEMS SPECIFICATIONS VOLTAGE [VAC] 200-240 FREQUENCY [HZ] 50/60 POWER [W] *550 50 STIRRING POINT POSITION QUANTITY MAX. STIRRING QUANTITY (H2O) [L] MAX. MAGNETIC BAR [L×Ø, MM] 80x10 MOTOR TYPE DC brushless motor MAX. POWER INPUT OF MOTOR [W] MAX. -
Page 12: Ordering Information
13. ORDERING INFORMATION PRODUCT CODE DESCRIPTIONS 400.100.130 Stirrer Magnetic Hotplate up to 30L ACCESSORIES 400.100.215 Sensor Temperature PT1000 100mm 400.100.218 Sensor Temperature PT1000 230mm 400.100.219 Sensor Temperature PT1000 230mm 400.100.225 Clamp Support for PT1000 Sensor... - Page 13 Page Left Intentionally Blank\...
- Page 14 Page Left Intentionally Blank...
- Page 15 Page Left Intentionally Blank...