Related Manuals for Freeman PXL31
Summary of Contents for Freeman PXL31
- Page 1 MODEL:PXL31 16 & 18 GAUGE 3-IN-1 16 & 18 GAUGE 3-IN-1 NAILER/STAPLER NAILER/STAPLER WARNING: Failure to follow warnings could result in DEATH OR SERIOUS INJURY. SAVE THIS MANUAL FOR FUTURE REFERENCE...
-
Page 2: General Safety Rules
MODEL: PXL31 MODEL: PXL31 SYMBOLS GENERALSAFETYRULES ● The following signal words and meanings are intended to explain the levels of risk UNPACKING associated with this tool, and can be found in the manual, packaging, labeling, and all other information provided with this tool:... -
Page 3: Tool Service
MODEL: PXL31 MODEL: PXL31 normal function of the tool. Do not attempt ● Do not force tool. Use the correct tool for implement; no horseplay. Do not use on a ladder or unstable to prevent the recoil by holding the tool supports. -
Page 4: Specifications
MODEL: PXL31 MODEL: PXL31 FEATURES ● Such precautionary measures reduce the risk NO-MAR SAFETY CONTACT of injury to persons. Eliminate damage to working surface. SPECIFICATIONS LOADING TOOL AIR CONSUMPTION: 3.7 SCFM with ● Do not load the tool with fasteners... -
Page 5: Clearing Jams
MODEL: PXL31 MODEL: PXL31 CLEARING JAMS SETTING THE AIR PRESSURE WARNING: The amount of air pressure required depends Occasionally, a fastener may become jammed The tool may fire when it is first in the firing mechanism of the tool, making the on the size of the fasteners and the workpiece connected to the air source. -
Page 6: Maintenance
MODEL: PXL31 MODEL: PXL31 Note: WORK CONTACT ELEMENT (WCE) CAUTION: WARNING: If the trigger is pulled before the work contact Disconnect the tool from the air source. CAUTION: It is advisable to test the element is depressed, the tool will not operate. -
Page 7: Cold Weather Operation
MODEL: PXL31 MODEL: PXL31 RECOMMENDED HOOKUP COLD WEATHER OPERATION LUBRICATION After adding oil, connect the tool to the air source, run tool briefly. Wipe off any For cold weather operation, near and below Frequent, but not excessive, lubrication is The air compressor must be able to excess oil from the cap exhaust. -
Page 8: Troubleshooting
2.Use only recommended fasteners. 3.Fasteners are bent. 3.Replace with undamaged fasteners. 4.Magazine or nose screws are loose. 4.Tighten screws. 5.Driver is damaged. 5.Replace driver. When it comes to quality air tools and compressors, Freeman is the brand you can depend on.
Need help?
Do you have a question about the PXL31 and is the answer not in the manual?
Questions and answers