Maintenance And Cleaning; Environment Protection - Jata EX1057 Instructions Of Use

• Do not use on hot surfaces.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
INSTRUCTIONS OF USE
• Before using, remove and clean the parts that are going to be in contact with the food.
• Place the citrus juicer on a flat surface and assemble the tank (5), the filter (4) and the cone (3).
• Plug the appliance into the mains.
• Cut the fruit into two halves, place a glass or a container under the spout (6) and press down to lower it. This
way the juice will be poured directly into the glass or container, else it will the juice will remain in the tank.
• Place the fruit in the cone and move down the handle (1). The juicing machine will begin to function
automatically. Do not press in excess with the handle.
• Once you have obtained the necessary juice, raise the spout (6) to its original position so the juice does not
drip.
• If you wish to continue making juice, place a glass under the spout and repeat the process.

MAINTENANCE AND CLEANING

• Before you proceed to cleaning it, ensure the citrus juicer is unplugged from the mains.
• The main body of the appliance must never be immersed in water. Clean it with a slightly damp cloth.
• The rest of the components which can be removed may be cleaned with soap and water, taking care to rinse
carefully afterwards. Never clean in the dishwasher. You also can remove the cone lid (2) for cleaning, just
by pulling it. Try to clean it immediately after its use, as the dry pulp of the fruit is very difficult to remove.
• Do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the surfaces of
the appliance.

ENVIRONMENT PROTECTION

• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
9