Adjust Exposure, Focus, And Shoot; Unload And Process Film - Kodak Super 8 Manual

B
0.0 ft 0.0 ft 0 CART 3 CART 3 50D 50D
+
-
0.0 ft 0.0
0.0 ft
+
1
-
Adjust Exposure, Focus,
and Shoot
1. Based on the light meter display, adjust the exposure
with the aperture ring (A).
NOTE: The image in the LCD viewfinder is not affected
by the exposure setting; it always displays an optimally
exposed image, for use in all lighting conditions.
2. Adjust focus with the focus ring.
TIP: For precise focus to the object, measure the
distance to the object from the film plane mark (B) on the
camera.
3. Shoot film: Press the run button to begin shooting.
Shooting will continue until you release the run button,
or press it again, depending on how you set the run
mode.
Each time you start and stop shooting, you create a scene,
starting with Scene1.
Scenes are numbered per cartridge.
See shooting tips at www.kodak.com/go/super8.
2
C 16 11 8 5.6 4
18 FPS 18 FPS
10dB
3
RUN
0dB
CART 3
3
RUN
A
1

Unload and Process Film

To unload the cartridge:
1. Open the film door.
2. Lift the cartridge and pull it out.
CAUTION: To avoid damaging the film gate, do NOT use
any tool to pry the film cartridge from the camera.
3. If you haven't already labeled the cartridge with the
assigned cartridge number (e.g. Cartridge1), do it now.
(A permanent marker works well.)
Super 8 Film processing lab directory is available at:
www.kodak.com/go/super8
TIP: Be sure to note the cartridge number.
Getting Started
2
3
19