Nintendo Wii Instruction Booklet page 6

In case of failure to connect to the network:
If connection fails, the screen for Step 1 will be displayed (see image below).
Select CHANGE SETTINGS and proceed according to the following instructions.
Set the following items according to the network
environment you are using.
Select NO for AUTO-OBTAIN IP ADDRESS to enable
manual setting.
Select
CHANGE SETTINGS.
WIRED CONNECTION AUTO-OBTAIN
Setting IP ADDRESS Setting
AUTO-OBTAIN
DNS Setting
Select SAVE to finish your settings and proceed one
* If the test succä@ds, You've completed Internet
setup and your Wijs Gonnected.
>
PROXY SERVER Setting
If the connection fails, try the same procedure
e h
` time.
Check the following before requesting repas, à A
Problem: Connection doesn't seem to be, o aak ork Nd Proper!
Are the Wii LAN Adapter Be sure to connect them correctly, Tolo the
and LAN cable connected instructlänsin "Connecting a S Adapter" in
correctly? this TX OEA porta
Is the LAN cable broken?
Problem: AneffoPcode is d
Error code: 504008950499
Reason
Solution
Turn off the power of the Wii console and firmly plug in the
Wii LAN Adapter as far as it will go.
Error, code: 51400 - 51499
Situation
Solution
+ Check if the USB plug of the Wii LAN Adapter is fully
inserted into one of the USB connectors on the Wii
console. If it is not plugged in securely, turn off the
power of the Wii console and firmly plug the USB
plug of the Wii LAN Adapter into one of the USB
connectors on the Wii console as far as it will go.
Cannot connect to the
Wii LAN Adapter for an
unknown reason.
Check your network device to ensure that the power is ON
Check that your network device and LAN cable are
securely connected. If not plugged in securely, turn off
the power of the Wii console and firmly plug the
connector of the LAN cable into the network device until
you hear it click into place.
Check that your Wii LAN Adapter and LAN cable are
securely connected. If not plugged in securely, turn off
the power of the Wii console and firmly plug the connector
of the LAN cable into the Ethernet connector of the Wii
LAN Adapter until you hear it click into place.
* There may be a problem with the network environment.
Check the settings of your network device.
If your Wii console does not function correctly even after performing the above
operations, contact your Nintendo Service Centre.