Advertisement
Checking the Power Level of Batteries
After the batteries have been loaded, check the power level of the
batteries.
Press the battery test buttons at the bottom of the
camera, and check the position of the needle seen in the battery
tester window.
1
For checking the mercury batteries, press the white button.
If
'
the needle is in the blue zone the batteries have sufficient
power level.
Otherwise, the mercury batteries must be replaced.
2
For checking the penlight batteries, press the red button.
If
the needle is in the blue zone the batteries have sufficient
power level for power zoom, 18fps and slow motion.
If the needle
is in the white zone the batteries have power level for power zoom
and 18fps only.
And if the needle does not move past the red
zone, the penlight batteries must be replaced.
4
Always check the power level of the batteries before shooting.
Attaching of Trigger Grip
Align the connecting parts of the trigger grip and the camera and
attach the grip onto the camera by screwing the attachment screws
into the attachment sockets.
Advertisement
