Sony MHC-GX555 Operating Instructions Manual page 28

Should you encounter a problem with your
system, do the lbllowing:
1
Make sure the power cord and speaker
cords are correctly and firmly connected.
2 Find your problem in the troubleshooting
checklist below and take the indicated
corrective action,
If the problem persists after doing all of the
above, consult your nearest Sony dealer.
When the I/_ indicator flashes
hnmediately unplug the power cord and
check the lollowiug items.
• If your system has a voltage selector, is die
voltage selector set to the correct voltage?
Check the voltage l\)r your region, then
make sure the voltage selector is set
correctly.
• Are the + and - speaker cords short-
circuited?
• Are you using only the prescribed
speakers?
• ls anything blocking the ventilation holes
on the rear of the system?
Check all the above items and fix any
problems found. Afle_ I/(_) indicator stops
flashing, reconnect the power cord and turn
on die system. If the indicator still flashes, or
if the cause of the problem cannot be lound
even after checking all the above items,
consult your nearest Sony dealer.
General
The display starts flashing as soon as you
plug in the power cord even though you have
not turned on the system (see step 6 of
"Hooking up the system" (page 6)),
• Press DISPLAY tx_ice x_bile the system is off. The
demonstration disappears
"- -:- -" appears in the display.
• A power interruption has occurred. Set Ihe clock
(page 9) and timer settings (pages 22 :and 23)
again.
The clock setting/radio presetting/timer is
canceled.
• Redo the follo_ing:
"Setting the clock" (page 9)
"Presetting radio stations" (page 14)
"Falling asleep to music" and "Waking up to
music" (page 22)
"Timer recording radio programs" (page 23)
There is no sound.
• Press VOLUME +_ or turn VOLUME control on
the unit clockwise.
• Make sure the headphones are not connected
• Check the speaker connections (page 6)
• There is no audio output during the Rec Timer.
Sound comes from one channel, or
unbalanced left and right volume.
• Place the speakers as symmetrically as possible.
• Connect file supplied speakers
Sound lacks bass.
• Check that the speaker's + and jacks are
connected correctly.
There is severe hum or noise.
• Mo_e Ihe system a_ay from the source of noise.
• Connect the system to a different wall outlet.
• lnqdl a noise filter (commercially available) to
the power cord.
The timer cannot be set,
• Set the clock again (page 9).
The timer does not function.
• Check the timer setting and set the correct time
(pages 23 and 24)
• Cancel the Sleep Timer function (page 22)
28 GB