Error Reset - Panasonic WH-MXC09J3E5-1 Quick Manual

Mono bloc air-to-water heatpump
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Force
Defrost

Error Reset

R/C Lock
Select to defrost the frozen pipes.
Press
to confirm your selection.
(When the mode is accepted, below screen will be displayed.)
Select to restore the previous settings when error has
occurred.
Press
to confirm your selection.
(When the mode has been accepted, below screen will be displayed.)
Select to lock the Remote Controller.
Press
to confirm your selection.
(When the mode has been accepted, below screen will be displayed.)
To unlock the Remote Controller
Press any key.
(When the mode has been accepted, below screen will be displayed.)
To reset forgotten password (under operation OFF screen)
Press
,
and
(When the mode has been accepted, below screen will be displayed.)
• Make sure all units are turned off before
selecting this mode which restores the whole
system to the previous settings.
Select "Yes".
(The Main Screen will be locked.)
• If "No" is selected, the screen will return to the
Main Screen.
Enter any 4 digits of number (if the number is
correct, the screen will be unlocked).
continuously for 5 seconds.
Select "Reset".
(The screen will be off after 3 seconds.)
7

Advertisement

Table of Contents
loading

Table of Contents