Table of Contents
Advertisement
Fault
Creasing.
and programme
terminated.
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
The programme does
not start.
Cause and troubleshooting
→ "Changing the dryness level", Page 23.
▶
→ "Adjusting the dryness level", Page 23.
▶
Anti-Crease not activated.
Activate the Anti-Crease function.
▶
→ "Buttons", Page 21
Condensation tank filled.
→ "Emptying the condensation container", Page 30.
1.
→ "Inserting the condensation container", Page 30.
2.
→ "Starting the programme", Page 27.
3.
Water drain hose is caught or jammed.
Ensure that the water drain hose is not kinked or
1.
trapped.
Route the water drain hose without kinks.
2.
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
→ "Connecting the water drain hose", Page 14
Water drain hose is blocked.
Rinse the water drain hose with tap water.
▶
Foreign object is located in the base unit
→ "Opening the base unit", Page 33.
1.
Remove the foreign objects that are present.
2.
→ "Closing the base unit", Page 34.
3.
The appliance uses condensation for the automatic
self-cleaning.
Not a fault – no action required.
▶
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
→ "Connecting the water drain hose", Page 14
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 30
▶
Start Reload has not been pressed.
Press Start Reload .
▶
No programme set.
→ "Setting a programme", Page 27.
1.
→ "Starting the programme", Page 27.
2.
Troubleshooting en
37
Advertisement
Table of Contents
