Download Print this page

Crown 1-VCAP Specification Sheet

Crown international stereo amplifier specification sheet
Hide thumbs Also See for 1-VCAP:

Advertisement

Quick Links

1-VCAP
4-VCAP
C
rown
®
VCAP panels are wall-mounted
panels with potentiometers that remote-
control the volume of Crown CTs 4200
and CTs 8200 amplifi er channels via a VCA-
MC4 or VCA-MC8 module installed in the
amplifi er.
Two models are available: 1-VCAP and 4-VCAP.
1-VCAP: See Figure 1. Used in conjunction
with a VCA-MC module, this is a single-gang
panel with one potentiometer that provides
remote volume control for one or more CTs
amplifi er channels. The potentiometer on the
panel is wired directly to the VCA connectors
on the VCA-MC.
4-VCAP: See Figure 2. This is a two-gang panel
with four potentiometers that provide remote
volume control for four or more CTs amplifi er
channels. The potentiometers on the panel are
wired directly to the VCA connectors on the
VCA-MC.
See Crown document 135504-1, VCA-MC
Series Operation Manual for installation and
wiring, attenuation per detent, and theory of
operation. This document is packed with the
VCA-MC modules and is available online at
www.crownaudio.com.
For more details about the VCAP panels, con-
tact the Crown Technical Support Group at
800-342-6939 or 574-294-8200.
Crown's Three-Year, No-Fault, Fully Transferable Warranty
Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for almost every new Crown
amplifi er product —an unsurpassed industry standard. With this unprecedented No-Fault
protection, your new Crown amplifi er product is warranted to meet or exceed original specifi ca-
tions for the fi rst three years of ownership. During this time, if your unit fails, or does not
perform to original specifi cations, it will be repaired or replaced at our expense. About the only
things not covered by this warranty are those losses normally covered by insurance and those
caused by intentional abuse. And the coverage is transferable, should you sell your unit.
See your authorized Crown dealer for full warranty disclosure and details. For customers
outside of the USA, please contact your authorized Crown distributor for warranty information
or call 574-294-8200.
C T S
A C C E S S O R I E S
Figure 1. 1-VCAP
Features
• 1-VCAP provides remote volume control for
one or more CTs amplifi er channels
• 1-VCAP fi ts into a 1-gang electrical box
Specifi cations
1-VCAP
Number of Potentiometers: 1
Potentiometer Resistance: 5 k ohms
Pins: VCA, GND, +10V
Weight: 3.0 oz (85 g)
Dimensions: 2-1/2 in x 4-1/2 in (6.4 cm x
11.4 cm) (Fits into a 1-gang electrical box.)
Figure 2. 4-VCAP
• 4-VCAP provides remote volume control for
four or more CTs amplifi er channels
• 4-VCAP fi ts into a 2-gang electrical box
4-VCAP
Number of Potentiometers: 4
Potentiometer Resistance: 5 k ohms
Pins: VCA, GND, +10V (x4)
(
)
Weight: 6.5 oz
184 g
Dimensions: 4-1/2 in x 4-1/2 in (11.4 cm x
11.4 cm) (Fits into a 2-gang electrical box.)
Crown International
1718 W. Mishawaka Rd.
Elkhart, IN 46517-9439
TEL: 574-294-8200
FAX: 574-294-8FAX
www.crownaudio.com
Specifi cations subject to change without prior notice. Latest
information available at www.crownaudio.com.
Crown and Crown Audio are registered trademarks of
Crown International. Other trademarks are the property of
their respective owners. Printed in U.S.A.
®
© 2005 Crown Audio
, Inc.
7/05
135770-1C

Advertisement

loading

This manual is also suitable for:

4-vcap