Bosch BKS71HYG Information For Use page 25

Emptying the water tank
→ Fig. 54 - 55
Cleaning and drying the mopping
pads
56 59
→ Fig. -
Changing the mopping pads
▶
Tip: To achieve optimum cleaning res-
ults, change the mopping pads every
6 months. Immediately change heavily
soiled or damaged mopping pads.
→ Fig. 60
Tr oubl e s hoot i n g
Troubleshooting
▶ Repairs to the appliance should only be
Tr oubl e s hoot i n g
carried out by trained specialist staff.
▶ Only use genuine spare parts when re-
pairing the appliance.
The appliance is not working.
The battery status display does not show
any status.
The battery has not been inserted correctly.
The battery has not been charged.
The red fault indicator lights up for 10
seconds.
The battery has overheated or overcooled.
The appliance has overheated or
overcooled.
No charging function.
Incorrect charger was used.
▶
Only use the charger that is included.
The dust container cannot be inserted.
The filter unit is not complete.
▶
Check whether the filter unit is com-
plete.
The filter unit or dust container is not
positioned correctly.
▶
Check whether the filter unit and dust
container are inserted correctly.
Suction is reduced.
The filter is blocked.
1. Switch off the appliance and disconnect
the appliance from the power supply.
Clean the filter unit.
2.
The nozzle is blocked.
Switch off the appliance and disconnect
1.
the appliance from the power supply.
Check whether the air channel from the
2.
nozzle to the appliance is blocked.
Empty the dust container.
3.
Clean the filter unit.
4.
Once the appliance has cooled down,
5.
switch the appliance back on.
The accessory does not work.
The accessory is not connected correctly.
1. Switch off the main unit.
2. Check that the accessory is correctly
connected.
The main unit is switched off.
▶
Switch the main unit on.
The battery has not been sufficiently
charged.
▶
Charge the main unit's battery.
The rotating plates do not turn.
The LED status indicator flashes quickly.
The mopping pads are incorrectly attached.
The accessory is used on an unsuitable
surface.
The mopping pads are blocked.
The water supply is not working.
The water supply is switched off.
▶
Briefly press
a The LED status indicator lights up.
a The mopping pads are moistened.
The water tank is empty.
Switch off the main unit.
1.
Fill up the water tank.
2.
Troubleshooting en
⁠ .
25