KEPCO FPD 50 Operator's Manual

OPERATOR'S MANUAL
Flat Pack Single Output DC to DC Converter
KEPCO INC.
An ISO 9001 Company.
IMPORTANT NOTES:
1) This manual is valid for the following Model and associated serial numbers:
MODEL
2) A Change Page may be included at the end of the manual. All applicable changes and
revision number changes are documented with reference to the equipment serial num-
bers. Before using this Operator's Manual, check your equipment serial number to identify
your model. If in doubt, contact your nearest Kepco Representative, or the Kepco Docu-
mentation Office in New York, (718) 461-7000, requesting the correct revision for your par-
ticular model and serial number.
3) The contents of this manual are protected by copyright. Reproduction of any part can be
made only with the specific written permission of Kepco, Inc.
Data subject to change without notice.
©2007, KEPCO, INC.
P/N 243-0793
KEPCO, INC. ! 131-38 SANFORD AVENUE ! FLUSHING, NY. 11355 U.S.A. ! TEL (718) 461-7000 ! FAX (718) 767-1102
All manuals and user guides at all-guides.com
FPD 50 WATT
POWER SUPPLY
100 Watt Output
150 Vdc Nominal Input
MODEL
FPD 50W-150V
POWER SUPPLY
SERIAL NO.
email: hq@kepcopower.com ! World Wide Web: http://www.kepcopower.com
REV. NO.
KEPCO
THE POWER SUPPLIER™
®