STO N SHO SNS 188c Installation Procedures Manual

2019-2023 porsche cayenne gts/turbo gt

Advertisement

Quick Links

Installation Procedures
2019-2023 Porsche Cayenne GTS/Turbo GT
SNS 188c
WARNING! READ BEFORE INSTALLATION!
3M tape is designed to adhere to the vehicle's clear coat. A clear bra or vehicle wrap will
impair the 3M tape's ability to bond with the surface. This bracket is not recommended for
use with either the clear bra or vehicle wrap.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SNS 188c and is the answer not in the manual?

Questions and answers

Summary of Contents for STO N SHO SNS 188c

  • Page 1 Installation Procedures 2019-2023 Porsche Cayenne GTS/Turbo GT SNS 188c WARNING! READ BEFORE INSTALLATION! 3M tape is designed to adhere to the vehicle’s clear coat. A clear bra or vehicle wrap will impair the 3M tape’s ability to bond with the surface. This bracket is not recommended for...
  • Page 2 STO N SHO and vehicle. STO N SHO LLC is not responsible for any damages that may occur to the STO N SHO bracket or vehicle itself due to improper installation, road conditions, driving, or care.
  • Page 3 Medium skill level required. If unsure, have bracket installed by your local Dealer or Body shop. Warranty only covers manufacture defects and STO N SHO LLC is not responsible for damages as a result of driving your vehicle. Exercise caution and avoid roadways that will cause damage to your vehicle.
  • Page 4 STO N SHO, LLC warrants to the original purchaser only that this product will be free of manufacturing defects in material and workmanship for the life of the product (Excluding pull- pin, see above) provided all maintenance is performed as required to the limitations and exclusions set forth below: Return product to any authorized dealer.
  • Page 5 This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For the name of your nearest authorized STO N SHO dealer, contact: STO N SHO, LLC at (408) 776-4080 or go to www.stonsho.com Fig 1 Base plate will be centered left and right, top to bottom.
  • Page 6 Fig 2 Bracket will be properly aligned when the front plate is approximately ¼” from the bumper Fig 3 Use masking tape or any other marking device to ensure proper alignment when affixing to the vehicle.
  • Page 7 Fig 4 Fig 5...

Table of Contents