Do you have a question about the CI-RL-UCON-D1 and is the answer not in the manual?
Questions and answers
Summary of Contents for NavLinkz CI-RL-UCON-D1
Page 1
Video converter CI-RL-UCON-D1 Compatible with Fiat vehicles with 7inch all-in-one radio or Uconnect 5 infotainment with 10inch monitor Video converter for digital rear-view camera input Product features Video converter for digital rear-view camera systems 1 video input for AHD 720p PAL rear-view camera (RCA) ...
Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. Apart from using this product in an unmoved vehicle, it should only be used to display fixed menus or rear-view- camera video when the vehicle is moving (for example the MP3 menu for DVD upgrades).
1.2. Checking the compatibility of vehicle and accessories Requirements Brand Compatible vehicles Compatible systems R1LOW Mitsubishi 7inch all-in-one radio Fiat Ducato3 (series 8) since model year 2021 Uconnect5 R1 EXT with 10inch tablet monitor with separate head-unit Limitations: Coding* Vehicle must already be coded for rear view camera by the factory. Video input signal Compatible only with 720p AHD camera with PAL signal.
1.3. Boxes and connectors – video interface The video-interface converts the video signals of connected after-market sources in a factory monitor compatible picture signal which is inserted in the factory monitor, by using separate trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and converts them for the video interface.
1.4. Settings - 8 Dip switches (black) Some settings have to be selected by the dip-switches on the video interface. Dip position down is ON and position up is OFF. Set all dip switches to OFF Dip 1 Dip 2 Dip 3 Dip 4 Dip 5...
2.3. Connection – power and picture signal cable Remove the head unit Connect the female bordeaux-coloured Fakra connector of the enclosed picture signal cable to the male bordeaux-coloured Fakra connector of the factory head unit. Connect the opposite female bordeaux-coloured Fakra connector of the enclosed picture signal cable to the male bordeaux-coloured Fakra connector of the video interface.
2.4. Connection – AHD Kamera Note: Only compatible with 720p AHD camera with PAL signal! Before a final installation of the video sources, we recommend a test-run to ensure the compatibility of vehicle and interface. Due to changes in the production of the vehicle manufacturer there’s always a possibility of incompatibility.
107 x 95 x 24 mm (W x H x D) 4. Technical support Please note that direct technical support is only available for products purchased directly from Navlinkz GmbH. For products bought from other sources, contact your vendor for technical support. 10R-05 16886 Made in China Version 20.02.2024...
Need help?
Do you have a question about the CI-RL-UCON-D1 and is the answer not in the manual?
Questions and answers