Advertisement
Stand for Musical instrument
Stand auxiliary material
Tighten the screws firmly
If the screw comes off, it may cause damage to the product or an unexpected
accident due to turnover or falling.
Do not get caught in the casters
Do not touch the casters with the fingers or place the feet or hands in the
direction of forward movement. It may cause getting caught in the casters
and getting injured.
Do not give a shock
Do not strike or knock down this product. It may cause damage to the
product or an unexpected accident.
Use and store in a flat and spacious place
Using or storing the product in an unstable place may cause damage to the
product or an unexpected accident due to turnover or falling.
■ Name of each part
Knob bolt ①
Side stand
Caster with lock
Example of setting a 16 notes Xylophone (XPA-16, etc.)
on the DKP-115
SUZUKI MUSICAL INST. MFG. CO., LTD.
DKP-115/DKP-118
DKP-108P
P r e c a u t i o n s f o r u s e
Fixture
Cushion rubber
Spacer
Holder for
bass side （ long）
Knob bolt ②
Holder for
treble side （ short）
Fixture
（with Knob bolt ③）
Caster with lock
Example of setting a 22 notes Xylophone (XPA-22, etc.)
2-25-7 Ryoke, Chuo-Ku, Hamamatsu, 430-0852 Japan suzukimusic-global.com
Do not use this product for any purpose other
than musical performance
If using it for any purpose other than musical performance, such as standing
on top of this product or using it as a stepstool, it may cause damage to the
product or an unexpected accident.
Lock the casters during musical performance
and storage
Musical performance or storing the product while remaining unlock may cause
damage to the product or an unexpected accident due to turnover or falling.
Move quietly
Be sure to unlock the casters when moving. Also, move quietly and lift up
where there are steps.
Wipe with a soft cloth as a care.
Never use chemicals or solvents such as alcohol, thinner, or benzine as they
will damage the product.
DKP-115/118 Assembly procedure
Align the direction of both side stands.
Align the direction of both side stands so that the casters
with locks are respectively on the front side (player side).
Check the direction of the spacer
The spacer holder has a bass side (long) / and a treble side
(short). Check the direction of the spacer so that the left
side is the bass side when viewed from the front side
(player side).
Install the spacer
Cushion rubber
Align the spacer and both side stands to the height as
desired, and fix them with knob bolts ①.
＊Install so that the left and right heights are the same.
Adjust the spacer
Adjust the spacer according to the size (width) of the
instrument and fix it with the knob bolt ②.
＊Make sure that the distance between the cushion rubbers of the
Knob bolt ①
left and right fixtures is slightly wider than the instrument.
Set and fix the instrument
Place the instrument on the holder and bring it closer to the
bass side fixture. Tighten the knob bolt ③ on the treble side
fixture and fix it firmly.
Side stand
on the DKP-118
Assembly instruction manual
Stand auxiliary material DKP-108P
If you set up a 22-tone xylophone/metallophone
bass model, please mount the auxiliary material
DKP-108P sold separately.
Holder for bass
side (long)
Holder for treble side (short)
Screw
Spring washer
Nut
DKP-108 or 118
Advertisement
