Pin-Assignments; Installation - Car-Interface.com CI-TF-MFD2 Manual

1.4.

Pin-assignments

Pin-assignment vehicle connector
Cable colour
●● Red/Yellow
● Brown
●● Orange/Green
●● Orange/Brown
Pin-assignment of the CAN-Box TV-500 (Molex 8pin)
Cable colour Pin-No. Assignment
● Yellow Pin 4
● Blue Pin 3
●● Yellow/Black Pin 8
●● Blue/Black Pin 7
● Red Pin 1
● Black Pin 5
● Green Pin 6
● White Pin 2

2. Installation

Switch off ignition and disconnect the vehicle's battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Version 20.09.2017
Assignment
+12Volt Permanent Pin 15
Ground Pin 12
CAN HIGH Pin 9
CAN LOW Pin 10
CAN-HIGH – connection to the head-unit
CAN-LOW – connection to the head-unit
CAN-HIGH – connection to the vehicle
CAN-LOW – connection to the vehicle
+12V permanent
Ground
Activation of the video-in-motion function
(+12V = TV-free activated)
Trigger output (+12V DC 500mA)
CI-TF-MFD2