Table of Contents
Advertisement
NOTE TO CABLE/TV INSTALLER
(For USA and Canada)
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines
for proper grounding and, in particular, specifies that
the cable ground shall be connected to the grounding
system of the building, as close to the point of the
cable entry as practical.
WARNING! (STABILITY HAZARD)
A television set may fall, causing serious personal
injury or death. Many injuries, particularly to children,
can be avoided by taking simple precautions such as:
– ALWAYS use cabinets or stands or mounting
methods recommended by the manufacturer of the
television set.
– ALWAYS use furniture that can safely support the
television set.
– ALWAYS ensure the television set is not overhanging
the edge of the supporting furniture.
– ALWAYS educate children about the dangers of
climbing on furniture to reach the television set or its
controls.
– ALWAYS route cords and cables connected to your
television so they cannot be tripped over, pulled or
grabbed.
– NEVER place a television set in an unstable location.
– NEVER place the television set on tall furniture (for
example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable
support.
– NEVER place the television set on cloth or other
materials that may be located between the television
set and supporting furniture.
– NEVER place items that might tempt children to
climb, such as toys and remote controls, on the top of
the television or furniture on which the television is
placed.
If the existing television set is going to be retained and
relocated, the same considerations as above should
be applied.
20
(Depending upon model)
This product does not rotate ±180 ˚.
If you feel resistance
during the rotation,
360º
do not over-rotate forcefully
but rotate in the opposite direction.
Product will be damaged
by over-rotation.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refers to "ON" (power).
Refers to dangerous voltage.
CAUTION
Advertisement
Table of Contents
