Table of Contents
Advertisement
port
View the MAC address of the
AP MAC
WLAN AP.
To delete all details of the connection profile, select Forget.
›
Connect to a WLAN using a Wi-Fi Protected Setup
(WPS)
1
In Menu mode, select Settings
Select WPS PBC or WPS PIN depending on the AP device type.
Press a WPS button on the AP device within 2 minutes. Or, enter
a PIN on the AP device and select Start within 2 minutes.
Mobile AP
Learn about the Mobile AP feature, which sets your device as an wireless AP
(Access Point) to connect to the internet on other network devices.
1
In Menu mode, select Settings
2
Select Mobile AP on the top to activate the Mobile AP feature.
3
Select OK to confirm.
IC notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
→
Connectivity
→
Connectivity
2
→
Wi-Fi.
3
→
Mobile AP.
Advertisement
Table of Contents
