Download Print this page
SAFAVIEH COUTURE Rynaldo SFV4812 Manual

SAFAVIEH COUTURE Rynaldo SFV4812 Manual

Dimensions:19.7"wx22.0"dx33.5"h

Advertisement

Quick Links

NOTICE
* Please make sure that you have all parts indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please
email customersupport@safavieh.com
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
* Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a
complete overall cleaning.
* The use of steam or water-based cleaners may cause excessive shrinking or staining.
Part List and Hardware List
PIECE
DESCRIPTION
A
Seat
B
Legs
Split Lock Washer(M8)
HW1
Flat Washer(M8)
HW2
HW3
Socket Screws 6*1.25*30MM
Allen Key
HW4
PICTURE
QUANTITY
1X
4X
12X
12X
12X
1X
SAFAVIEH
C O U T U R E
Model#: SFV4812
Dimensions:19.7"WX22.0"DX33.5"H
Weight Capacity: 275 lbs
Warning: Do not stand on Chair
Warning: Do not over torque bolts

Advertisement

loading

Summary of Contents for SAFAVIEH COUTURE Rynaldo SFV4812

  • Page 1 NOTICE SAFAVIEH * Please make sure that you have all parts indicated and they are in good condition before you begin assembly of this item. Refer to part list and hardware list below for guidance. * This item should be assembled on a soft surface to prevent scratching the finish during assembly.
  • Page 2 HW2 HW1 HW3 STEP1 OPEN THE CARTON AND TAKE OUT LEGS STEP3 INSERT THE LEGS AND SCREW IN THE STEP2 PUT THE WASHERS ON THE SCREW IN THE AND HARDWARE SCREWS BUT DON'T TIGHTEN COMPLETELY. ORDER SHOWN IN THE PICTURE STEP5 PUT THE CHAIR UPRIGHT AND MAKE SURE ALL LEGS ARE STEP4 REPEAT THE SAME STEPS FOR THE OTHER LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH ALLEN KEY WHILE...

This manual is also suitable for:

Rynaldo sfv4812aRynaldo sfv4812cRynaldo sfv4812b