Technical Data - DeWalt DCF900P2G Original Instructions Manual

18V CORDLESS IMPACT WRENCH
DCF900
Congratulations!
You have chosen a STANLEY FATMAXD
experience, thorough product development and innovation
make STANLEY FATMAXD WALT one of the most reliable
e
partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Power output
No load speed
Impact rate
Max tightening torque
Precision Wrench™ mode
Low Mode
Medium mode
High mode
Max breakaway torque
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841‑2‑2:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
WALT tool. Years of
e
DCF900
V 18
DC
1
Li‑Ion
W 760
min ‑1 0–2300
min ‑1 0–2200
Nm 1396
Nm 135
Nm 813
Nm 1396
Nm 1898
kg 2.9
dB(A) 92.5
dB(A) 103.5
dB(A) 3
m/s 2 15
m/s 2 1.5
EC‑Declaration of Conformity
Machinery Directive
18V Cordless Impact Wrench
DCF900
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑2:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
65510, Idstein, Germany
10.03.2022
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
18V Cordless impact Wrench
D WALT declares that these products described under
e
"technical data" are in compliance with:
EN62841‑1:2015, EN62841‑2‑2:2014
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended).
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
WALT at
e
WALT.
e
DCF900
WALT at the following
e
WALT.
e
English
3