The following instructions are designed to ensure safety during
installation and use of the JW10A. Failure to heed these instructions can
result in injury or damage to the unit or vehicle.
The following installation instructions are intended to be used as a basic
guideline. If you feel unsure about installing this speaker system yourself,
Jensen recommends acquiring the services of a professional car audio
installation center.
Before installation, please review the following guidelines:
1. Be sure to carefully read and understand the instructions before
attempting to
install this product.
2. If additional wiring is required, we recommend running all wires prior to
mounting your enclosure in place.
3. To ensure reliable performance and minimize signal or power loss, use
the
highest quality connectors available.
4. Never run speaker wires underneath your vehicle. Running speaker
wires inside the vehicle provides the best protection from exhaust, heat
and environmental elements.
5. Avoid running wires over, near or through sharp-edged surfaces. We suggest you
also use rubber grommets to protect any wires routed through metal, especially the
firewall.
6. When running the speaker cable to the amplifier, avoid running it near sources of
high current (i.e. wiring harnesses, battery cables).
INSTALLATION
Safety First
!
CAUTION