Advertisement
4. OPERATION
WARNING! Ensure that you read, and fully understand the safety instructions before use.
‰
NOTE: Before initial use, fully charge the unit.
4.1.
BATTERY CHARGING
4.1.1.
Ensure the floodlight is turned off before charging (fig.1).
4.1.2.
Battery charge level is indicated by the LED display (fig.1). Four LEDs lit indicate full charge.
4.1.3.
When full charge has been reached, unplug the charger cable from the power supply.
4.2.
USING THE FLOODLIGHT
4.2.1.
Turn floodlight on and off using the mode switch (fig.1) on the main body.
4.2.2.
The floodlight has 4 working modes selected by use of the Mode Selector switch (fig.1).
4.2.3.
Operating modes are: Two brightness settings (High / Low), SOS and flash mode.
4.2.4.
Adjust the position of the light using the ratchet effect built into the joints of the frame.
5. MAINTENANCE
WARNING! Ensure that you read, understand and apply the safety instructions relating to the battery before changing it.
‰
5.1.
Ensure the floodlight is turned 'Off' before attempting to charge the battery.
5.2.
Wipe down dirty surfaces with damp cloth. DO NOT use abrasive or caustic cleaning materials.
5.3.
Dispose of broken unit in accordance with local authority battery regulations. DO NOT dispose of with regular refuse.
5.4.
STORAGE
5.4.1.
Store the charger in a safe, dry location.
NOTES:
DO NOT fully discharge the batteries before recharging.
DO NOT leave batteries in a discharged state, recharge batteries immediately. If the floodlight is not in use, recharge the batteries every
three months.
Mode
Selector
Fig.1
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
USB Input/
Output
LED Battery
Level Indicator
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
LEDFL10W
Issue:1
01/04/21
Advertisement
