Table of Contents
Advertisement
4.3 Connection of water drain hose
on products with vapour feature
You can directly drain accumulated water
through the water drain hose supplied with
the product instead of periodically draining the
water collected in the water tank
If your dryer has a steam feature,
follow the following diagram for the
water discharge connection.
1
3
1 Remove the clamp attached to the stopper
at the back of the dryer by pulling it from
the place it is connected with the help of a
tool.
2 After removing the clamp, pull the plug
under the clamp.
3 Attach the water drain hose supplied with
the machine to the pipe under the plug.
4 Your machine is ready for use with direct
discharge.
The water discharge hose shall be
fixed at maximum 80 cm height.
Ensure that the water discharge
hose do not get kinked, collapsed
or pressed on between the
discharge and the drying machine.
Hose shall be connected not to
NOTICE
be disconnected from its location.
Leaked water may cause damage.
Do not extend the water drainage
hose.
Check whether the water runs at an
appropriate flow. The drainage line
shall not be closed or clogged.
Dryer / User Manual
2
4
If an accessory package is provided
with your product, check the
detailed instructions.
4.4 Adjusting the stands
4.5 Moving the drying machine
•
Drain the water in the drying machine
completely.
•
If the product is connected via direct
discharge, remove the hose connections.
The drying machine is
recommended to be moved in
upright position. Otherwise, tilt it to
the right side when viewed from the
front and move the drying machine.
Wait 12 hours prior to operating the
drying machine.
4.6 Warning regarding the noise
Until the drying
machine stands level
and sturdy, adjust
the stands by turning
them left and right.
As the product is
operated, metallic
noises may come
from the compressor
from time to time, it is
normal.
15
Advertisement
Table of Contents
