Table of Contents
Advertisement
adjust HDMI Ultra HD setting when TV is in the HDMI
source. Recommended setting for legacy device is
Standard.
• The setting Optimal allows maximum up to Ultra HD
(50Hz or 60Hz) RGB 4:4:4 or YCbCr 4:4:4/4:2:2/4:2:0
signals.
• The setting Standard allows maximum up to Ultra HD
(50Hz or 60Hz) YCbCr 4:2:0 signals.
Maximum supported video timing format for HDMI Ultra
HD options:
• Resolution: 3840 x 2160
• Frame rate (Hz): 50Hz, 59.94Hz, 60Hz
• Video data sub-sampling (bit-depth)
- 8 bit: YCbCr 4:2:0, YCbCr 4:2:2*, YCbCr 4:4:4*, RGB
4:4:4*
- 10 bit: YCbCr 4:2:0*, YCbCr 4:2:2*
- 12 bit: YCbCr 4:2:0*, YCbCr 4:2:2*
* Supported only when HDMI Ultra HD is set
to Optimal, or Optimal (Auto Game) / Optimal (Auto
Game 120Hz Pro).
Select Standard if the picture or sound are distorted.
• Set Optimal (Auto Game) / Optimal (Auto Game
120Hz Pro) to enable TV to support the HDMI Variable
Refresh Rate* video (on some models only and the
Picture style setting is not Monitor). This option also
enables TV to automatically set Picture/Sound style to
Game whenever it is informed by the HDMI device
connected to TV.
* With HDMI Variable Refresh Rate supported, the TV
changes its refresh rate in real time according to the
frame rate signal to synchronize with every picture. It is
applied to reduce the lag, judder and frame tearing for
better gaming experience.
Note:
To watch HDR10+ content from HDMI source, you may
need to power off your player and power on again when
the player connected to TV playing such content for the
first time. HDR10+ content is supported only when HDMI
Ultra HD is set to Optimal or Optimal (Auto Game) /
Optimal (Auto Game 120Hz Pro).
Auto Movie Mode
Set the Auto movie mode
(Home) > Settings > General settings > Auto movie
mode
Set Auto movie mode to On, if you want TV to
automatically set Picture style to Movie whenever it is
informed by the HDMI device connected to TV.
Manage Demos
(Home) > Apps > Demo me > Manage demos
If the TV is set to Shop, you can manage the demo videos
in Demo me app.
Play demo video
(Home) > Apps > Demo me > Manage demos > Play
Select a demo video file and play.
Copy demo file
(Home) > Apps > Demo me > Manage demos > Copy
to USB
Copy demo file to USB drive.
Delete demo file
(Home) > Apps > Demo me > Manage
demos > Delete
Delete demo file from your TV.
Configuration of demo
(Home) > Apps > Demo me > Manage
demos > Configuration
Set the TV to Main TV or Sub TV.
Download new demo file
(Home) > Apps > Demo me > Manage
demos > Download new
If the Configuration is set to Main TV, you can
download new demo file.
Auto delay setting
(Home) > Apps > Demo me > Manage demos > Auto
delay setting
Set the Auto delay time from 15 seconds to 5 minutes.
Auto loop selection
(Home) > Apps > Demo me > Manage demos > Auto
loop selection
Select a demo file for auto loop playing.
Reset TV Settings and Reinstall TV
Reset all settings value to original TV settings
(Home) > Settings > General settings > Factory
settings
Redo full TV installation , and set TV status back to the
first time you switch on
(Home) > Settings > General settings > Reinstall TV
Enter PIN code and select Yes, the TV will reinstall
completely. All settings will be reset and installed
channels will be replaced. The installation can take a few
43
Advertisement
Table of Contents
