Vizio Remote Control - Vizio VX240M User Manual

VIZIO VX240M User Manual

VIZIO Remote Control

GUIDE – This button displays program information.
POWER ( ) – Press this button to turn the TV on from the Standby
mode. Press it again to return to the Standby mode.
TV – Press this button to select TV.
AV – Press this button to select the AV (either Composite or S-Video)
input.
COMP – Press the button to select the Component input.
HDMI – Press this button to select the HDMI input. By pressing it
repeatedly you will go through all HDMI inputs in sequence.
MENU – Use this button for the On-Screen Display (OSD) menu. Press
the button to select a feature after it has been highlighted.
▲▼◄ ►
-These buttons are used to navigate the OSD menu. They
are used as value settings when the slide bar is shown on the screen
and option settings to turn a feature off or on.
MUTE – This button turns the sound on and off.
LAST – This button recalls the previously viewed channel. If the On-
Screen Display (OSD) menu is being used, this button will allow you to
get back to previous menu screen or out to your program when you
press it repeatedly.
VOL ▲/▼ – This button turns the volume up or down.
CH ▲/▼ – This button turns the channels up or down.
NUMBER BUTTON PAD – Use these buttons to select a channel or
enter a password.
INPUT –Repeatedly pressing this button will step you through the input
sources in the following sequence: TV, AV, Component, RGB, HDMI1,
and HDMI2. The sequence will then be repeated.
- (DASH) – When selecting a digital channel directly, use this button for
the separation of main and sub-channels. For example, channel 28-2
would be selected by the button sequence 2 8 DASH 2.
Version 5/8/2009 13
www.VIZIO.com