Tuner Mode; Auto Search; Partial Channel Search; Skip Channel - Vizio VX200E User Manual

VIZIO VX200E User Manual

Tuner Mode

Select Cable or Antenna depending upon which equipment you have attached
to the DTV / TV Input.

Auto Search

Automatically search for TV channels that are available in your area. The TV
will search for analog and digital channels.

Partial Channel Search

If you believe channels are missed from the auto search, you can do a partial
channel search to look for channel in a certain channel range again. Select to
▼
scan for Analog, Digital, or both Analog/Digital channels, then press the
button to highlight the "From" and "To" selection. Press the ► button to select
the range of channel numbers you want to start searching in. Press MENU to
start channel search.

Skip Channel

After the TV has stored all of the available digital channels in memory you will
find that some channels are too weak to watch comfortably or they may be
▲ ▼
channels you do not want to see when using the CH or CH buttons. You
will still be able to select this channel using the number buttons on the remote
▲ ▼
control. Scroll through the channels listed using or or scroll a page at a
time by pressing ◄ or ►. Press the MENU button to select the channel to be
skipped.

MTS

This feature allows you to select the different languages the broadcaster is
transmitting the audio with the program you are watching. This signal is usually
Spanish.

Time Zone

Setting the correct Time Zone for your area will ensure that the correct program times are shown after
pressing the GUIDE button on the remote control.

Daylight Saving

Setting the daylight saving time for your area will ensure that the correct program times are shown after
pressing the GUIDE button on the remote control.

Channel Info

Channel Info displays the technical information of the channel including channel number, frequency,
modulation type, status, SNR (signal noise ratio), and signal strength.
Version 5/8/2009 37
www.VIZIO.com