Advertisement
5-2. In case there is no display on the screen in specific modes
(1) Symptom
1) There is no screen display from a specific input mode
(RF, AV, Component, RGB, DVI).
(2) Procedure check
1) Check the all input modes have normal display.
2) Check the video(main)/ data(sub), video(main)/ video(sub) have normal
displays from the PIP mode or DW mode(re-check it/ swap).
(3) In case of an unusual display in RF mode
Is the Tuner normal?
Yes
Is the CXA2069Q normal?
Yes
Block A
Is the FIL8548 normal?
(4) In case of an unusual display in Component, RGB mode
Are the R,G,B input and H,V
Sync of the J1100 normal?
Yes
Same as Block A
(5) In case of an unusual display in HDMI mode
Is the HDMI002(IC1004)
normal?
Yes
Same as Block A
(6) In case of an unusual display in SCART1 mode
Is the Video input of the
A/V Jack(J1200) normal?
Yes
Same as Block A
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
No
Is the Tuner Cable connected?
No
Re-insert the cable
No
Are the Input voltage, IIC
Communication and HV sync normal?
No
Are the input voltage, IIC
Communication and HV sync normal?
No
Check the input source
No
Are Input voltage, IIC Communication
and HV sync normal?
No
Check the input source
- 19 -
Yes
Are the Input voltage, IIC Communication
and CVBS output normal?
Replace the Tuner.
No
Replace the IC.
No
Replace the IC.
No
Replace the IC.
No
LGE Internal Use Only
Advertisement
