Vizio VP503 User Manual page 31

c. The screen will now change
to show the progress of the
search for Analog (NTSC)
and Digital (ATSC) channels.
Note: DTV digital broadcast is not available in all areas. Refer to
about availability in your area, type of antenna and in which direction to point your antenna. The channel
availability through cable depends upon which channels your cable operator supplies in Clear QAM;
consult your cable operator for more information.
d. When finished, the
Complete screen will be
displayed to inform you that
the HDTV has completed
the Initial Setup.
Press the
remote control to exit and
begin watching TV.
5. Select Input Source
Select the Input Source for the HDTV by pressing the INPUT button on
the side of the TV or using the Input button on the remote control.
Pressing this button will cycle you through the following options: TV, AV/S-
VIDEO, Component, RGB, HDMI1, HDMI2, HDMI3 and HDMI4.
Now follow the procedure below to display channels from a different
signal (External TV Tuner, VCR, Cable Box or Satellite Receiver) source,
using different inputs at the back of you TV set.
Version 5/27/2008
button on the
►
www.VIZIO.com
®
VIZIO
www.antennaweb.org
31
VP503 HDTV10A User Manual
for information