Temperature Control - Marathon MFF179WBM-LH Manual

18 cu.ft. bottom mount frost free refrigerator

Hide thumbs

Table Of Contents

Table of Contents

Setting the Temperature Control

Your unit has one control for regulating the temperature. The temperature control is located on the outside of

the refrigerator compartment door.

The default temperature is displayed in Fahrenheit when the unit is first powered on. Press and hold the

"MODE" button 5 seconds, to switch between °C and °F. Other buttons use the same method to switch

between two modes.

Set temperature range: Celsius degree mode

1.Fridge temperature range: 2-8℃ (Default value 5℃)

2.Freezer temperature range: -23-15℃ (Default value -18℃)

Set temperature range: Fahrenheit degree mode

1. Fridge temperature range: 32-46°F (Default value 41°F)

2. Freezer temperature range: -10-5°F (Default value 0°F)

• The first time you turn the unit on, the unit will start at the factory-set default temperature, which is 41°F

(5°C) in the refrigerator compartment and 0°F (-18°C) in the freezer compartment.

• The first time you turn the unit on, adjust the temperature in the refrigerator compartment to 37ºF (3°C)

and run for at least 4 hours before placing food inside. This will ensure that the freezer compartment is

thoroughly chilled and the refrigerator compartment is stabilized before food is placed inside. Then adjust

the temperature setting to your desired setting.

• To adjust the temperature in each zone, press the appropriate zone button, and the selected zone will flash

on and off. The temperature will change according to the pre-set temperatures as shown below. You will

hear a bell chime with each press of the control panel buttons.

MFF179WBM-LH | MFF179WBM-RH

MFF179SSBM-LH | MFF179SSBM-RH