Kenwood KR-V6040 Instruction Manual page 18

Listening to broadcasts
M@ Receiving broadcast stations and
storing them in memory (preset
operation)
AUTO key
Numeric key
P.CALL key
MEMORY key
1 Press the TUNER key.
@ Previous reception mode is resumed.
@ Pressing the BAND key also set the unit to tuner made.
2 Select the broadcast band.
Every time the BAND key is pressed,
the received frequency band is changed.
3 Select the tuning mode. light up.
@ Normally, select the auto mode {with AUTO lighted). —_ Press the key to select the auto (AUTO lighted) or manual (not lighted) mode.
4 Tune the desired station. -
V TUNING A
To decrease To increase Press once. {Tuning Press repeatedly, or press and
frequency frequency stops automatically when | hoid, until the desired station is
a station is received.) received,
@ The TUNED indicator lights up when a station is received.
@ Use manual tuning mode when the radio wave is weak and noisy.
At this time, the stereo FM broadcast is received in monaural mode.
P . MEMORY A -
5 Store the station in preset memory.
[MEMORY lights up for approx. Ssec.
gill ttte,, @ Press the MEMORY key. == hy
@ Proceed the steps 2 while the MEMORY indicator is lighted. ed iiks
| eid,
a
x
MEMORY |goes off.
@ Press the numeric key. DIRECT V TUNING A AUTO
CT Ce ES)
a a. ee ae)
Ee ee ae
g 1%,
Ea Co
@ Up to10 stations can be preset for each of the FM1, FM2 and AM bands.
@ When a station has previously been preset under the numeric key pressed,
the newly preset station replaces the previous station.
18 «R-veo40 (En)