Interface Pin Connection; Tft Lcd Module - iLO LCT32HA36 Service Manual

5. INTERFACE PIN CONNECTION

5.1 TFT LCD MODULE

CNF1 Connector Pin Assignment
Pin No. Symbol
1 GND
2 RPF
3 SELLVDS
4 NC
5 NC
6 ODSEL
7 LCS
8 GND
9 RX0-
10 RX0+
11 RX1-
12 RX1+
13 RX2-
14 RX2+
15 RXCLK-
16 RXCLK+
17 RX3-
18 RX3+
19 GND
20 GND
21 GND
22 GND
23 GND
24 GND
25 GND
26 VCC
27 VCC
28 VCC
29 VCC
30 VCC
Note (1) Connector Part No.: FI-X30SSL-HF(JAE) or compatible
Note (2) Reserved for internal use. Left it open.
Note (3) Low or open: normal display (default), High : display with 180 degree rotation
Note (4) Overdrive lookup table selection. The Overdrive lookup table should be selected in accordance to the
frame rate to optimize image quality.
ODSEL
L or Open Lookup table was optimized for 60 Hz frame rate.
H Lookup table was optimized for 50 Hz frame rate.
Note (5) Please refer to 5.5 LVDS INTERFACE (Page 18)
Note (6) Enable Low color shift function.
LCS
L or Open Low color shift off
H Low color shift on
Description
Ground
Display Rotation
Select LVDS data format
No Connection
No Connection
Overdrive Lookup Table Selection
Low Color Shift
Ground
Negative transmission data of pixel 0
Positive transmission data of pixel 0
Negative transmission data of pixel 1
Positive transmission data of pixel 1
Negative transmission data of pixel 2
Positive transmission data of pixel 2
Negative of clock
Positive of clock
Negative transmission data of pixel 3
Positive transmission data of pixel 3
Ground
Ground
Ground
Ground
Ground
Ground
Ground
Power supply: +5V
Power supply: +5V
Power supply: +5V
Power supply: +5V
Power supply: +5V
Note
Note
90／134
Note
(3)
(5)
(2)
(4)
(6)