Table of Contents
Advertisement
For composite video and S-Video output, make sure the HD Component and HD DVI options are
Off. Choose the TV system output (NTSC/PAL) that matches your TV's capabilities.
If you turn the HD Component/DVI On with the TV hooked up via S-Video or composite video
connections, the on-screen menu will no longer be visible. If this happens, unplug the Bravo D1,
plug it back in, turn it on, and enter the following Remote Control command sequence:
5. Press Setup to display the Setup menu.
6. Press
for the Video Settings option.
7. Press
once and then press
option.
8. Press
once and then
9. Press
to confirm.
This should turn the HD Component/DVI option Off, and you will be able
to see the menu again.
Alternatively, you can select the output by using the TV Mode toggle.
Look at the display on the Bravo D1 and press the TV Mode button
repeatedly until the NTSC selection is lit.
BRAVO D1 User Guide
once to select the HD DVI Out
to select OFF.
Page 17
.
VINC.COM
Advertisement
Table of Contents
