Subscribe to Our Youtube Channel
Related Manuals for TUYA S9E
Summary of Contents for TUYA S9E
- Page 1 10”Super Smart Multi-functional Control Panel(in-wall) SPEC Ver. Description Creator Date V1.2 First edition Engineer Department June-13-2023...
-
Page 2: Table Of Contents
Contents Chapter 1 Product presentations ............3 1.1 Appearance ................. 3 1.2 Main Features ................3 Chapter 2 Product Specifications ............4 RK3566B Quad core Cortex-A35 ..........4-5 Chapter 3 Ports and Specifications ............5 3.1 Interface and ports .............. 5-6 3.2 Specifications ................7 Chapter 4 Installation instructions ............. -
Page 3: Chapter 1 Product Presentations
Chapter 1 Product presentation 1.1 Appearance 1.2 Main Features ● Fit Asian 86mm*86mm wall boxes, simple inwall installation. ● 10.1-inch HD LCD, IPS, multi touch screen, quadruple microphone with noise reduction, built in 2 x 2W speakers, light sensor, radar sensor, temperature and humidity sensor. ●... -
Page 4: Chapter 2 Product Specifications
(Zigbee 3.0) Measurement range of Measurement range of Temperature temperature: Humidity humidity : 0℃ to +60℃ 0%-99%RH Temperature Type-C port, Built-in Ports and humidity sensor, light Sensors RJ 45 sensor, radar sensor Functions Gateway Built-in Tuya Zigbee and support custom zigbee. -
Page 5: Chapter 3 Ports And Specifications
Relays Built in 2 relays (200W Each) which can control 2 switches of the room lights locally. Built in 2*2W Mono speakers, users can custom their local Music play music source play, online music sources optional. Automatically adjust the screen brightness according to Light sensor surroundings. -
Page 7: Specifications
3.2 Specifications Item Specifications Product Super Smart Multi-functional Control Panel Name Product Model Input Power 100-240VAC, 0.3A, 50/60Hz Working 0℃ to +40℃ Temperature Working 5% to 90%RH(Non-condensing) Humidity Wireless Wi-Fi, Bluetooth, Zigbee Protocol 272x155x38mm (with the base) Product 272x155x11.5mm (without the base | Outside the wall) dimensions 68x68x26.25mm (back base dimension) 60mm (bolt hole spacing) -
Page 8: Chapter 4 Installation Instructions
Chapter 4 Installation instructions ● Turn off the main power in the electricity box and confirm the live wire is not alive with a test pencil. ● Remove the base of the smart panel and install it in the wall box (as shown in the pictures following). - Page 9 Note: Make sure the circuit power were cut off before wire connections! Circuit breaker used as disconnected device shall be incorporated in the electrical installation of the building. Depth of the wall box should be more than 50mm.
-
Page 10: Wires Connection Drawing
4.2 Wires connection drawing... -
Page 11: Chapter 5 Operation Guideline
● Please note that this product doesn’t support PoE, please do not plug the PoE network cable into ethernet port to avoid burning damage. 5.2 Operation guideline *This operation guideline is based on Tuya ZigBee, Tuya App,Tuya cloud platform and Smatek S9E firmware. If any other platforms or firmware, please follow their operation guidelines. - Page 12 when you start it in the first time. You can also get into the network settings from the select menu by dropping down from the top of the LCD screen. (2)There are two options in the network settings. You can select wireless connection or wired connection.
- Page 13 QR code showing on the screen after the network connection is done. (3) Start the Tuya App in your smart phone, select the “ ” at top right corner in the App home page, and then select the “ ”at top right corner in the App page.
- Page 14 (4)Scan the QR code on the screen of the product to add it into the Tuya App. You will find a 10'' panel icon in your App. (5) Enter the panel interface in the Tuya App, you will see the gateway and switch icons like .
- Page 15 LED indication light flickering which means it is in the set-up mode.) You will see the following pictures in the Tuya App when you are adding sub devices to the gateway. Make sure the sub devices are in the set-up mode and the LED indication...
- Page 16 (7) Click the Done button on the App after you add the sub device successfully. For example (3 Gang Switch) as the following. (8) You could change the name of the sub devices after they are added to the gateway successfully.
- Page 17 Drop down - sync to have devices and scenes sync to panel. (9) You could change the device type by getting into the device interface in the App. It means the switch is off when it is in grey, and the switch is on when it is in green. You could also set up timers(Schedule) for the switches to realize the automation control.
- Page 18 (10) If you want to add your devices faster,click the“ ” and then select the “ ”to add corresponding devices manually,finally drop down the list on panel and click “sync” to stay sync with App.
- Page 19 If there is any questions when you add some other sub devices, please contact us for support.
Need help?
Do you have a question about the S9E and is the answer not in the manual?
Questions and answers