Advertisement
Installation Guide
5GHz 2x2 Outdoor IP68 Directional 10dBi Panel Pole/Wall Mount Antenna
2. Test the antenna with the device to make sure it is receiving the best RSSI signal: turn the
azimuth and elevation, then tighten all the screws and make sure your own RF cable is
connected with a lock seal, if you bought the LLMR-NNP-1M/ 2M RF cable, you can directly
use the waterproof cap provided with LLMR-NNP-1M/2M to tightly seal the connector
between ANT-10AD RF cables.
3
Advertisement
