El.Mo MDGPSE Technical Manual

El.Mo MDGPSE Technical Manual

Gps module for position management arranged for use with indoor or outdoor antenna

Advertisement

Quick Links

GPS module for position management
arranged for use with indoor or outdoor
antenna
mod. MDGPSE
TECHNICAL MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MDGPSE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for El.Mo MDGPSE

  • Page 1 GPS module for position management arranged for use with indoor or outdoor antenna mod. MDGPSE TECHNICAL MANUAL...
  • Page 2 MDGPSE - TECHNICAL MANUAL - 090020769 WARNING FOR THE INSTALLER: Please follow carefully the specifications relative to electric and security systems realization further to the manufacturer's prescriptions indicated in the manual provided. Provide the user the necessary indication for use and system's limitations, specifying that there exist precise specifications and different safety performances levels that should be proportioned to the user needs.
  • Page 3 090020769 - TECHNICAL MANUAL - MDGPSE 1. GENERALS The MDGPSE module has been developed for VILLEGGIO control units and other compatible devices for the management and positioning communication for installation on vehicles. Take advantage of the signal, with the position data, provided by the worldwide network of satellites for civil use GPS service.
  • Page 4 For module programming is necessary to refer to the manual programming of the control unit with 4.x firmware or higher. Note: In this manual we refer to the installing operations of the only MDGPSE module installation so that the installer must consult the MDGSME module technical manual.
  • Page 5 090020769 - TECHNICAL MANUAL - MDGPSE 3.1 Antenna installation Before installation is necessary to decide the antenna model and its positioning on the vehicle. For its security use is possible to dissemble its presence using MDANT1 module placed on a metal surface that may be protected by fiberglass parts of the vehicle.
  • Page 6 MDGPSE - TECHNICAL MANUAL - 090020769 3.2 MDGPSEmodule installation The MDGPSE module must be inserted ONLY into the connector marked with A on the printed circuit of the card base and the image below. To do this, you must use two NYLON spacers, supplied with the module, or use the kit with screws, hex nuts and spacers as shown above.
  • Page 7 4. DISPOSAL INSTRUCTION Dispose of MDGPSE in accordance with current city regulations and by leaving the device in a dumping ground which is authorized for the disposal of electronic products; if required, please contact the appropriate city office for additional information.
  • Page 8 3.2.MDGPSE module installation ........

Table of Contents