Subscribe to Our Youtube Channel
Summary of Contents for EcoSmart LR411U-2.4X7IR-1M-1024
- Page 1 Item #1009 513 064 Model #LR411U-2.4X7IR- 1M-1024 40 in WHITE BATTERY POWERED STRIP LIGHT WITH MOTION SENSOR...
- Page 2 Table of Contents ........Installation ........5 Safety Information ......... Operation ..........8 Warranty ..........3 Care and Cleaning ......Pre-Installation ........4 Battery Safety ........11 This strip light is intended for indoor use only This strip light is not intended for commercial use Do not expose the strip light to excessive heat or moisture THIS IS AN ELECTRIC LIGHT - NOT A TOY! TO AVOID RISK OF FIRE, BURNS, PERSONAL INJURY, ELECTRIC SHOCK AND ACCIDENTALLY...
-
Page 3: Warranty
This warranty shall not apply to the nish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. Contact the Customer Service Team at 1-800-910-7164 or visit www.HomeDepot.com/EcoSmart. - Page 4 Contact the Customer Service Team at 1-800-910-7164 or visit www.HomeDepot.com/EcoSmart. Part Description Quantity Strip light Controller AAA batteries Remote control Mounting clips Screws...
- Page 5 Prepare the strip light (optional) Shorten the strip light (A) to the desired length by cutting along the black lines.
- Page 6 Install the strip light Ensure that the mounting location is even, clean, and dry. Remove the protective film from the back of the strip light (A). Press the strip light (A) to the mounting surface and hold in place for a few seconds.
-
Page 7: Install The Controller
Install the controller Remove the protective film from the back of the controller (B). Press the controller (B) to the mounting surface and hold in place for a few seconds. Use the mounting clips(E) and screws(F) to further secure the strip light. -
Page 8: Operating The Remote
Operating the remote CAUTION: The remote control included utilizes a 3V CR2025 battery; Do not dispose of batteries in fire as they may explode or leak. Please dispose of used batteries immediately and safely. Only replace with the same battery type. Examine devices and make sure the battery compartment is correctly secured, e.g. - Page 9 Operation(continued) Button Description ON: Press to turn on the light OFF: Press to turn off the light Adjustable brightness: Increase or decrease the 10-level of light brightness Adjustable speed: Increase or decrease the 10-level speed of dynamic mode Fade mode Flash mode Adjustable brightness: 100%, 50%, 25%, 10% Press to turn on the motion mode...
-
Page 10: Controller Operation
Operation(continued) Controller Operation Set the switch to AUTO to activate the motion sensor on the controller(B). Press the power button to turn on and off the light NOTICE: Detects motion up to 6.5ft... - Page 11 Use a soft, dry cloth to clean the strip light. Do not use alcohol-based cleaners, as this may damage the light surface.
Need help?
Do you have a question about the LR411U-2.4X7IR-1M-1024 and is the answer not in the manual?
Questions and answers